No tclsh command :(

jovan88

Hey guys,

I've got a 3640 and a few 2621 XMs with IOS 12.4, but I can't seem to find the tclsh command! Do I need to enable it somewhere or am I using the wrong IOS?

Any help is appreciated.

#show ver
Cisco IOS Software, 3600 Software (C3640-I-M), Version 12.4(16), RELEASE SOFTWARE (fc1)
Technical Support: Cisco - Shortcut
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 20-Jun-07 11:43 by prod_rel_team

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

R2 uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c3640-i-mz.124-16.bin"

Cisco 3640 (R4700) processor (revision 0x00) with 125952K/5120K bytes of memory.
Processor board ID 25124494
R4700 CPU at 100MHz, Implementation 33, Rev 1.0
1 Ethernet interface
5 Serial interfaces
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of NVRAM.
24576K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


R1#show ver
Cisco IOS Software, C2600 Software (C2600-IPBASEK9-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
Technical Support: Cisco - Shortcut
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:04 by prod_rel_team

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

R1 uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbasek9-mz.124-17.bin"

Cisco 2621XM (MPC860P) processor (revision 1.0) with 61772K/3764K bytes of memory.
Processor board ID JAD07110PG0
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
2 Serial interfaces
32K bytes of NVRAM.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

kryolla

This is how you get into tclsh
Rack1R3#tclsh
Rack1R3(tcl)#tclquit
Rack1R3#

if that doestn't work then you have the wrong IOS and I'm too lazy to look it up

jovan88

thanks dude, looks like a dram/flash upgrade for me and bump up the IOS to something better

Fish!

You definitely need something better than IP and IPBase feature sets to get tclsh support.

I have 256/48 in all four of my XM lab routers...best upgrade I ever made to my lab. So slap a big 'ol 32mb flash stick in that 2621xm along with a 12.2(8r) bootrom and a pair of 128mb big-dog dimms and max that '21xm out!