Questions about DNS in PKT
pedenski
Member Posts: 3 ■□□□□□□□□□
in CCNA & CCENT
Hi, im quite new to networking and currently studying ccent.
I made a small simulation at packet tracer and I have these following networks.
PC1&PC2 > Switch > Router1 (s0/1) to Router2 (s0/1) > Server
I set the DNS for
Test.com Web Based Testing and Certification Software v2.0 192.168.10.2
PC1and2 can Ping the server but everytime I use the built in webbrowser of PC1 and 2, an errors shows saying 'hostname unresolved'
what should I do then?
I made a small simulation at packet tracer and I have these following networks.
PC1&PC2 > Switch > Router1 (s0/1) to Router2 (s0/1) > Server
I set the DNS for
Test.com Web Based Testing and Certification Software v2.0 192.168.10.2
PC1and2 can Ping the server but everytime I use the built in webbrowser of PC1 and 2, an errors shows saying 'hostname unresolved'
what should I do then?
Comments
-
ptlinva Member Posts: 125Ping can get across but port 80 isn't... Hmm...
It's possible that your network is fine, but rather your computer is not configured correctly.
First thing I'm thinking of is to check the browsers lan settings (Tools/Internet Options/Connections Tab/Lan Settings) to make sure that there's no proxy set and that it's also setup up to automatically detect settings.
If that doesn't fix it, let us know...
-Paul -
pedenski Member Posts: 3 ■□□□□□□□□□im sorry but i dont get your point. im referring to the packet tracer sir..
-
LBC90805 Member Posts: 247Did you actually set up a webserver too at that ip address you listed in the DNS entry?