Totally scrambled screen when I boot up a 25xx router...

pogue

Here is an example of what I am getting when I boot up.. Any ideas? No ability to type anything, and no idea what happened to it.

I kinda need this router up quickly for frame relay practice, as I have decided to go for my ICND2 on Friday if possible.

Thanks,

Russ


˜æ†øæžfxæø枘~†ž`ž˜à˜††àf~fæø˜žx˜
žffžøž˜žfxæžþžff€˜€æ€˜€f†˜†˜†~˜†žxfž†ž`˜àž†ž˜˜x€f†fxxfxæøfx`˜þf˜`˜˜xf~fæà~fx˜˜†ž˜˜fæø~ffžxàžæøžæ€˜€ffžžžøžþž~†
ž˜ž˜€fžfž~f~þžfæø˜øfx†~†žfx˜€†øæx˜ž˜øfžøž~žff†žþž`f†fxàžþžxæ†f†ž†àžff€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜žx†žøž~fxf€˜€†˜àžàžfæ
xž˜f˜æfx†æ~þžx˜žx€žf€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜žx€žf€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜žx€žf†ž†žf†ž`f€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜ž˜æfx†àfxæžf€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜ž˜àžæøæøžfæøæøf€˜€†˜àžàžfæxž˜f˜æfx†æ~þžx˜žž`~f€˜€fžffxfžøž~xþ
žx˜øfxæøàfxxæžfxžf~žf~æžþž`˜€~`fxæž~怘€fžffxfžøž~xþž˜øfxæøàfxxæžfxžf~žf~æžþž`˜€~`fxæž~怘€fžffxfžøž~xþž˜à˜øfxæøàfxxæžfxžf~žf~æžþž`˜€~`fxæž~怘€fžffxfžøž~xþžxf˜ø

dynamik

What are you connection settings at? If they're at the defaults, try adjusting them a bit.

tiersten

What dynamik said. It looks like you've got 7 bit mode on. The default are 9600 8N1 so try that.

pogue

It's the same settings I use with all my routers/switches..All I have to do is move the console cable to get it working with another device.

I am stumped.

Russ

blackninja

Have you used this router before or is this the first time you've turned it on?

pogue

Used it before....

And once again, I have fixed my own problem....

Hrmmmmmm.......

I changed the baud rate to 4800, and inexplicably, it works... Back to 9600, and scrambled.

I used this connection at 9600 before with this router, and no issues.

I have never in my life seen this happen with a router console port.

Weird.

Linux44, yer up at bat, sir!!

Russ

tiersten

You can change the baud rate with the config register.

pogue

tiersten wrote: »

You can change the baud rate with the config register.

Thanks for the heads up on that...The config register setting was jacked..

????

like 0x863 or something like that. I set it back to 2102, and it is booting up now, readable at 9600 baud.

How would the config register have gotten changed?

Russ