Bios problem

photex

Hey Guys.

I have a question.
Yesterday I tried to change something in my bios, no big deal normally, done it many times.
But when I was asked to press DEL to enter setup, witch I did, I only got a black screen and nothing more.
Tried to reboot few times, no result.
Then tried bios update, bur still no result.
I really don't know how this could happen? It always worked fine.....
Does anyone have a clue about how to fix this??

Greetz

dynamik

There should be a way to clear the settings by altering a jumper setting or removing the battery on the mobo.

Daniel333

Is it defauling to another video card?

Sometimes no video indicates bad, incorrect or no ram.

Paul Boz

you got any kind of sweet beeping action going down when you boot the machine?

kriscamaro68

Like someone said if you have another video or onboard video then it could be showing up on that so switch your monitor cable back and forth see if that works. Also there is a jumper setting that clears your bios settings and sets them back to default. It should be a 3 pin that says something like jbat or the like check your mobo docs but make sure the computer is off and set the jumper to the other pins and then back to the way it was after a few seconds and that should do it. Hope that helps.

photex

The tft screen seemed to be the problem?!?
Very strange, always worked.
After replacing the screen the bios showed just fine.
The strange thing is that the old screen worked fine in windows!

Thanks for your help!