1721 - Can mine do router on a stick?

drew2000

I read that IP Plus is required. I wanted to check my version to make sure I could use IP Plus, and it looks like I can from the Cisco IOS Feature Navigator.

I am running IOS 12.2(15)(T17). According to the Navigator 12.2(15)(T16) supports IP Plus, which is only one version lower.

Can anyone give me a sanity check?

Thanks,
Drew

sh ver

Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(15)T17, RELEASE SOFTWARE (fc1
)
Technical Support: Cisco - Shortcut
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 12-Aug-05 23:30 by kehsiao
Image text-base: 0x80008120, data-base: 0x80C55A9C

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SY-M), Version 12.2(15)T17, RELEASE SOFTWARE (fc1)

Router uptime is 8 minutes
System returned to ROM by power-on
System restarted at 04:38:39 UTC Fri Sep 28 2007
System image file is "flash:c1700-sy-mz.122-15.T17.bin"

cisco 1721 (MPC860P) processor (revision 0x500) with 55374K/10162K bytes of memo
ry.
Processor board ID FOC09441ASE (295342349, with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)

mikej412

drew2000 wrote: »

IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(15)T17

drew2000 wrote: »

System image file is "flash:c1700-sy-mz.122-15.T17.bin"

The sy tells you it's an IP Plus feature set. The 12.2(15)T17 is the version.

You should be able to do 802.1Q trunking to do router on a stick with that IOS.

tech-airman

drew2000,

Can you configure subinterfaces on your FastEthernet interface?

drew2000

I haven't tried it yet, just doing the preliminary work before I tackle router-on-a-stick tomorrow!

Thanks,
Drew