Hardware Question (Equipment Rack)

I hope this is the right place for this type of question and thanks in advance!

Unfortunately my home lab is in a location that my 10 month old can get to… so, I’m looking at picking up an enclosure for it.

Specifically this one -> http://cgi.ebay.com/12U-19-Wall-Mount-Rackmount-Server-Cabinet-w-Casters_W0QQitemZ200358259998QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2ea6486d1e&_trksid=p3286.c0.m14&_trkparms=65%3A15|66%3A2|39%3A1|293%3A1|294%3A50

I don’t have a lot of experience with this type of hardware, and I was hoping that someone could answer a few questions about it.

Edit: I found the info I needed.

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

captobvious

I wouldn't see it as being a problem, if you have a specific lab setup. I see it being a real pain in the butt if you have to open it up to move cables. Doesn't look like a lot of room to move around inside.

Just my 2 cents!

jbrad95706

captobvious wrote: »

I wouldn't see it as being a problem, if you have a specific lab setup. I see it being a real pain in the butt if you have to open it up to move cables. Doesn't look like a lot of room to move around inside.

Just my 2 cents!

Thanks for the info! I would rather it be a pain for me to get at, and impossible for his little fingers to get at.