**My CCIE R&S Video Lab Tutorial Thread**

2

Comments

  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    thanks, on to the final push towards the lab. i might try to sit it early next year. on that note:

    IP Services LAB 2

    In this video I configure the following:

    Network Time Protocol (NTP) on a router
    Basic NTP for both Broadcast and Non-broadcast Networks

    YouTube - bowlersp's Channel
  • cisco_troopercisco_trooper Member Posts: 1,441 ■■■■□□□□□□
    These are really cool. Thanks for the heads up! Hey, just wondering if you are in the army reserves by any chance(your name sounds familiar)? I worked as a weekend warrior for DISA in a Colorado Springs unit for a bit.

    Did you do any work with the Gold Disk? I had to work with DISA a couple times on getting some bugs worked out of that thing a couple years back.
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Frame Relay Lab 1

    In this video I configure the following:

    Frame Relay switch in GNS3
    Frame Relay using Static Maps
    Explain Inverse Arp and Show how it is used

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Frame Relay Lab 2

    In this video I configure the following:

    Frame Relay switch in GNS3
    Frame Relay using point-to-point subinterfaces

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Frame Relay Lab 3

    In this video I configure the following:

    Frame Relay switch in GNS3
    Frame Relay using point-to-multipoint subinterface

    YouTube - bowlersp's Channel

    Frame Relay, CCNA, CCNP, CCIE, GNS3
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Policy Based Routing Lab 1

    In this video I configure the following:

    Access Control List
    Route-map
    Policy Based Routing

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    PPP Authentication Lab 1

    In this video I configure the following:

    PPP Authentication over Point to Point Serial Link
    PPP CHAP Authentication
    PPP PAP Authentication

    YouTube - bowlersp's Channel
  • tigerplugtigerplug Member Posts: 40 ■■□□□□□□□□
    Excellent work on uploading this stuff! I am beginning my CCNP journey so I think these may co
    e in very handy icon_smile.gif


    Good luck with your studies!
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    tigerplug wrote: »
    Excellent work on uploading this stuff! I am beginning my CCNP journey so I think these may co
    e in very handy icon_smile.gif


    Good luck with your studies!

    thanks, stay tuned. there is a lot more to come. i am currently working on building my gns3/dynamips server. once i get that done, it is back to the labs!
  • veritas_libertasveritas_libertas Member Posts: 5,746 ■■■■■■■■■■
    Don't know how I missed this. Very cool! :D
  • papaipapai Member Posts: 2 ■□□□□□□□□□
    We have created a study group at work based around GNS3 and your videos. Thanks and keep up truckin'!!! icon_study.gif
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    OSPF Lab 1

    In this video I configure the following:

    OSPF in Two different Areas
    OSPF simple and MD5 authentication
    OSPF Summarization (Internal)
    Explain the basics of OSPF

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    IPV6 LAB 2

    In this video I configure the following:

    IPV6 address auto-configuration

    www.youtube.com/bowlersp
  • ConstantlyLearningConstantlyLearning Member Posts: 445
    Keep up the good work man.
    "There are 3 types of people in this world, those who can count and those who can't"
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    GRE Tunnel Lab 1

    In this video I configure the following:

    GRE Tunnel
    EIGRP Across GRE Tunnel
    Explain GRE Tunnel Basics

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    EIGRP Lab 1:

    In this video I configure the following:
    EIGRP Basics
    EIGRP Network command
    EIGRP MD5 Authentication
    Explain how EIGRP calculates the composite metric

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    EIGRP LAB 2

    In this video I configure the following:

    EIGRP Summarization
    EIGRP Leak-maps
    EIGRP default route
    Virtual Template Interfaces

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    HSRP LAB 1

    In this video I configure the following:

    Hot Standby Router Protocol
    Explain Basics of HSRP
    HSRP Interface Tracking
    HSRP Preemption
    HSRP traffic flow

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    OSPF LAB 2

    In this video I configure the following:

    Open Shortest Path First
    OSPF in 5 different Areas
    OSPF Virtual links
    OSPF Virtual link alternative (GRE Tunnel)
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    MPLS VPN LAB 2

    In this video I configure the following:

    EIGRP as ISP Backbone routing protocol
    MPLS over ISP Backbone
    Multi-Protocol BGP
    Virtual Routing and Forwarding (VRF)
    External BGP from PE to CE
    BGP allow-as in
    BGP as-override
    Explain BGP AS-Path Attribute in MPLS VPN

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Access Control List (ACL) Lab 3

    In this video I configure the following:

    Time Based Access Control List (TBACL)
    Explain/Verify how TBACL's work

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    CONNECTING REAL SWITCHES TO GNS3

    In this video I show you how to:

    Connect a real 3550 to GNS3

    Verify connectivity between the router in GNS3 and the Real 3550

    Give you specifications on my GNS3/Dynamips Server and CCIE R&S lab setup

    YouTube - bowlersp's Channel
  • shodownshodown Member Posts: 2,271
    Thanks as always for the vids. I still hate DISA:D, but at least I know some good people are there.
    Currently Reading

    CUCM SRND 9x/10, UCCX SRND 10x, QOS SRND, SIP Trunking Guide, anything contact center related
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    shodown wrote: »
    I still hate DISA:D, but at least I know some good people are there.

    you and me both, brother. anyway, been trying to leave for a while now. One more test and I'm out for sure.
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    been in the trenches for too long...

    SWITCHING LAB1

    In this video I show you how to:

    Configure a layer 2 Etherchannel
    Configure a layer 3 Etherchannel
    How to verify Etherchannel connectivity

    www.youtube.com/bowlersp
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Redistribution Lab 1

    In this video I show you how to:

    Perform Mutual Redistribution between RIPv2 and OSPF
    Use a route-map to tag routes
    Explain RIP and OSPF Metrics
    Verify that redistribution is being performed properly

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    SWITCHING LAB 2

    In this video I configure the following:

    Dynamic Trunking Protocol (DTP)
    Explaing how to use DTP
    Verify DTP using appropriate show commands

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    SWITCHING LAB 3

    In this video I configure the following:

    Vlan Trunking Protocol (VTP)
    Explain how to use VTP
    Explain the different modes of VTP
    VTP Authentication
    VTP Pruning
    Verify VTP using appropriate show commands

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Switching Lab 4

    In this video I configure the following:

    Vlan Trunking from a Switch to a Router
    Configure/Explain "router-on-a-stick" and use show commands for verification
    Configure/Explain VLAN's and use show commands for verification

    YouTube - bowlersp's Channel
  • CCIEWANNABECCIEWANNABE Banned Posts: 465
    Been a while since I posted a video. But don't worry, I have 20 new labs. Been busy with the administration of the small business, making videos and studying for the CCIE R&S lab that is coming up in september. With that said:

    ACL Lab 4

    In this video I configure the following:

    * Configure/Explain the Zone Based Firewall concepts listed below and use show/debug commands for verification
    * Setup a Zone Based Firewall (ZBF) and show how they work with the MQC configuration set.
    * Explain in detail how filtering takes place within ZBF's
    * Explain the different Zone types
    * Explain the concept of a Zone Pair
    * Explain how you apply the policy map to the Zone pairs
    * Explain how to put interfaces into different Zones

    YouTube - bowlersp's Channel
Sign In or Register to comment.