Setting up SDM on 2621XM
EDIT: fixed with Java version 1.6.0.3
Hey guys, I'm trying to setup SDM 2.5 with my cisco 2621XM router. I've installed SDM on my pc but I can't connect, keeps telling me IP/hostname could be wrong or http(s) isn't setup. I've checked both, setup the pc and router with default IP of 10.10.10.2 and .1 (router) but no go. I've also setup a username priv 15 and password with vty using local database for auth. I can ping between both devices.
I also thought I'd try to be clever and debug http but nothing showed up :P
Any ideas?
EDIT: fixed with Java version 1.6.0.3
Hey guys, I'm trying to setup SDM 2.5 with my cisco 2621XM router. I've installed SDM on my pc but I can't connect, keeps telling me IP/hostname could be wrong or http(s) isn't setup. I've checked both, setup the pc and router with default IP of 10.10.10.2 and .1 (router) but no go. I've also setup a username priv 15 and password with vty using local database for auth. I can ping between both devices.
I also thought I'd try to be clever and debug http but nothing showed up :P
Any ideas?
EDIT: fixed with Java version 1.6.0.3
Progress: CCIE RS Lab scheduled for Jan. 2012
Equipment: Cisco 360 program racks
Equipment: Cisco 360 program racks
Comments
-
Ryan82
Member Posts: 428
Do you have 'ip http server' enabled?
Or
'ip http secure-server' for https? If using the https have you generated your RSA keys? -
accely
Member Posts: 101
yes, I have both enabled and the https did generate RSA keys when I enabled it.Do you have 'ip http server' enabled?
Or
'ip http secure-server' for https? If using the https have you generated your RSA keys?
Another thing that's interesting is if I try to open up the 'normal' web interface by using the router's IP address it doesnt connect either. Which I know has worked before in some of my labs... maybe I should try one of the 2610XMs... i dunno
Also, before doing anything, I had performed an erase start and reloadProgress: CCIE RS Lab scheduled for Jan. 2012
Equipment: Cisco 360 program racks -
accely
Member Posts: 101
well I tried it on one of my 3640's and it loads up perfect, I didn't do any configuration other than assign an IP address to the router's eth0/0.
Now I have the problem when I click "launch selected task" in the Site to Site VPN it doesn't load anything! bahProgress: CCIE RS Lab scheduled for Jan. 2012
Equipment: Cisco 360 program racks -
mikej412
Member Posts: 10,086 ■■■■■■■■■■
http://www.techexams.net/forums/ccna-security/45545-few-problems-sdm.html#post334652
http://www.techexams.net/forums/ccna-ccent/45074-cisco-sdm.html#post336768:mike: Cisco Certifications -- Collect the Entire Set! -
accely
Member Posts: 101
woot kudos mike
removed all prior instances of java and then installed 1.6.0.3 and it's working now Progress: CCIE RS Lab scheduled for Jan. 2012
Equipment: Cisco 360 program racks
