nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

multiple dchp servers/entries - one router

JNeko

Just curious,

Possible? Can't test right now.

As various tutorials state:

R2#config t
R2(config)#ip dhcp pool Admin
R2(dhcp-config)#network 10.1.8.0 255.255.255.0
R2(dhcp-config)#default-router 10.1.8.1
R2(dhcp-config)#exit
R2(config)#ip dhcp excluded-address 10.1.8.1
R2(config)#

If I have another ethernet segment on the router, 10.1.9.0 /24, can I simply create another pool as above with appropriate ip addresses?

Thanks,
J

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

ColbyG

Yea, you can make a lot of DHCP pools (not sure what the max is, it probably varies). The router will hand out the appropriate address based on the interface it recieved the request on.

ncsugrad2002

ColbyNA wrote: »

Yea, you can make a lot of DHCP pools (not sure what the max is, it probably varies). The router will hand out the appropriate address based on the interface it recieved the request on.

Yep. Just make another pool and let the router figure it out

JNeko

awesome, thought that's how it worked. thanks.
J