Options

Cisco 2511 ACCESS SERVER ROUTER 16D/16F

jamison1jamison1 Member Posts: 12 ■□□□□□□□□□
in CCNA & CCENT
I've just purchased a home lab

 AS2511-RJ – 16 asynchronous ports
as2511 router x 1
 3640 Router x 1
 2620XM Router x 5
 2500 Routers x 5
 2950 switch x 5



 i have all the serial cables and know how to configure then individually, I want to start my CCNA/CCNP home lab.

 the main question is (correct me if I’m wrong) I need to connect the 2511 to all the other active devices via a rollover cable and use the AS2511 as the single point of entry from my computer so that I don’t need to keep moving my console cable to every device if not configure or want to erase the configuration.

 Thanks
· Share on FacebookShare on Twitter

Comments

  • Options
    Bl8ckr0uterBl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□
    jamison1 wrote: »
    I've just purchased a home lab

     AS2511-RJ – 16 asynchronous ports
    as2511 router x 1
     3640 Router x 1
     2620XM Router x 5
     2500 Routers x 5
     2950 switch x 5



     i have all the serial cables and know how to configure then individually, I want to start my CCNA/CCNP home lab.

     the main question is (correct me if I’m wrong) I need to connect the 2511 to all the other active devices via a rollover cable and use the AS2511 as the single point of entry from my computer so that I don’t need to keep moving my console cable to every device if not configure or want to erase the configuration.

     Thanks

    Review this Cisco 2509, 2510, 2511, and 2512 - Overview of the Cisco 2500 Series Access Server - Cisco Systems
    · Share on FacebookShare on Twitter
Sign In or Register to comment.