Polycom Video through ASA

marcusaureliusbrutus

Hi,

I am trying to setup a polycom video conferencing device connected in our inside network.

I have configured the ff. on my ASA:

static (inside,outside) 20.30.40.51 10.10.2.3

*on outside interface

int outside
access-list INBOUND line 1 permit ip any 20.30.40.51

The problem is video conference is established but i am getting one way video. The remote site can see me but i can't see them. I am thinking that it has something to do with the ACL but i already allowed all to the public IP.

Also, if i connect the polycom device directly to my router, everything works fine.


Thanks in advance.

erndogg

marcusaureliusbrutus wrote: »

Hi,

I am trying to setup a polycom video conferencing device connected in our inside network.

I have configured the ff. on my ASA:

static (inside,outside) 20.30.40.51 10.10.2.3

*on outside interface

int outside
access-list INBOUND line 1 permit ip any 20.30.40.51

The problem is video conference is established but i am getting one way video. The remote site can see me but i can't see them. I am thinking that it has something to do with the ACL but i already allowed all to the public IP.

Also, if i connect the polycom device directly to my router, everything works fine.


Thanks in advance.

Make sure that you have enabled H.323 inspection in the global policy.