hey guys
i am so frustrated.
My access router seems to be fickle but maybe I am doing something wrong.
my switches keep rejecting my reverse telnet but the other devices do not.
!
ip host s2950_3 2004 100.1.1.1
ip host s2950_2 2003 100.1.1.1
ip host s2950_1 2002 100.1.1.1
ip host S3550 2001 100.1.1.1
ip host R1 2005 100.1.1.1
ip host R2 2006 100.1.1.1
ip host R3 2007 100.1.1.1
ip host R4 2008 100.1.1.1
ip host R5 2009 100.1.1.1
ip host AP1200 2010 100.1.1.1
ip host ASA5505 2011 100.1.1.1
ip host R831 2012 100.1.1.1
ip host FRC 2013 100.1.1.1
ip host R2610 2014 100.1.1.1
ip host R2610XM 2016 100.1.1.1
!
!
!
!
interface Loopback0
ip address 100.1.1.1 255.255.255.255
!
the switches 2001 to 2004 do not even work
they use too? and then stopped is it because of the dram size on my 2511 it is only 8mb? is that why??? I try to urn 16 async reverse telnet with my 2511 and is 8mb dram not enough? if I got a 16/16 would that work better? I am at a loss I have try eveything I think i know
but I cannot get the switches to accpet reverse telnet? is there a setting
on the switches line con 0 I need to set? I have no clue
and am going to blow a rod!
help guys
all the other devices work fine
