Routing in ICND1

daveccna

Is it a correct assesment that RIP and RIPv2 are ICND1 while the others are ICND2?

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

notgoing2fail

daveccna wrote: »

Is it a correct assesment that RIP and RIPv2 are ICND1 while the others are ICND2?

I don't think so, maybe the ICND2 covers EIGRP and OSPF in much more depth, in fact, I'd say they do. But I think you still have to have a basic understanding of how other protocols work, even for ICND1....

captobvious

Follow the exam blueprint 640-822 ICND1 Exam Topics (Blueprint) (you will need to create a login) and you can't go wrong.

Good luck!

daveccna

captobvious wrote: »

Follow the exam blueprint 640-822 ICND1 Exam Topics (Blueprint) (you will need to create a login) and you can't go wrong.

Good luck!

Is that available anywhere else? The cisco website is a joke.

binargs

according to wendell odom's book, cisco official exam book:
ripv2 config and familaiarity is needed to poass the icnd1 exam. you do not need to know how to configure eigrp, ospf or isis untill icnd2. but you do need to know the difference between them: ospf and isis picks routes based on bandwidth of the routes instead of the physical hops, auto summary is not available on ospf or isis, ripv1 is classful routing only and do not include subnet mask, and eigrp is a cisco prop. hybrid routing protocol that combines hops and bandwidth. administrative distance is assigned by a router based on the protocols used, direct connect is 0, static is 1, then eigrp, ospf, then isis, then ripv2 and igrp and ripv1.

these are just something from the top of my head. check your book for other routing stuff that you migth have to know.