Options
subnetting
ranny17
Member Posts: 4 ■□□□□□□□□□
in CCNA & CCENT
hi guys i was going through the skills intergration packet tracer exams for ccna 2 exploration chapter 11 which is ospf...and i sure need some help on this. i have subnetted the network and here is my output
requirements:
1) 6000
2)2000
3)1000
4)800
5)500
6)400
7)120
subnetworks:
1)172.16.0.0/19
2)172.16.32.0/21
3)172.16.40.0/22
4)172.16.44.0/22
5)172.16.48.0/23
6)172.16.50.0/25
point to point subnets are my major concerns here:
1) 172.16.54.0 172.16.54.1 - 172.16.54.6
2) 172.16.54.8 172.16.54.9 - 172.16.54.12
can somebody please verify my subnets
requirements:
1) 6000
2)2000
3)1000
4)800
5)500
6)400
7)120
subnetworks:
1)172.16.0.0/19
2)172.16.32.0/21
3)172.16.40.0/22
4)172.16.44.0/22
5)172.16.48.0/23
6)172.16.50.0/25
point to point subnets are my major concerns here:
1) 172.16.54.0 172.16.54.1 - 172.16.54.6
2) 172.16.54.8 172.16.54.9 - 172.16.54.12
can somebody please verify my subnets
Comments
-
Optionsgeorgemc Member Posts: 429requirements:
1)6000
2)2000
3)1000
4)800
5)500
6)400
7)120
subnetworks:
1)172.16.0.0/19 = 6000 = 8192
2)172.16.32.0/21 = 2000 = 2048
3)172.16.40.0/22 = 1000 = 1024
4)172.16.44.0/22 = 800 = 1024
5)172.16.48.0/23 = 500 = 512
6)172.16.50.0/23 = 400 = 512
7)172.16.52.0/25 = 120 = 128
point to point subnets:
1) 172.16.52.128 172.16.54.128 - 172.16.54.131 (.129 and .130 usable)
2) 172.16.52.132 172.16.54.132 - 172.16.54.135 (.133 and .134 usable)hi guys i was going through the skills intergration packet tracer exams for ccna 2 exploration chapter 11 which is ospf...and i sure need some help on this. i have subnetted the network and here is my output
requirements:
1) 6000
2)2000
3)1000
4)800
5)500
6)400
7)120
subnetworks:
1)172.16.0.0/19
2)172.16.32.0/21
3)172.16.40.0/22
4)172.16.44.0/22
5)172.16.48.0/23
6)172.16.50.0/25
point to point subnets are my major concerns here:
1) 172.16.54.0 172.16.54.1 - 172.16.54.6
2) 172.16.54.8 172.16.54.9 - 172.16.54.12
can somebody please verify my subnetsWGU BS: Business - Information Technology Management
Start Date: 01 October 2012
QFT1,PFIT in progress.
TRANSFERRED/COMPLETED: AGC1,BBC1,LAE1,QBT1,LUT1,QLC1,QMC1,QLT1,IWC1,INC1,INT1,BVC1,CLC1,MGC1, CWV1 BNC1, LIT1,LWC1,QAT1,WFV1,EST1,EGC1,EGT1,IWT1,MKC1,MKT1,RWT1,FNT1,FNC1, BDC1,TPV1 REQUIRED: -
Optionschmorin Member Posts: 1,446 ■■■■■□□□□□May be worth knowing if you couldn't grasp it from the previous post (great post, by the way), that the point to point subnets are using a /30 mask. This gives you 4 IP's, one for network address and one for broadcast. Leaving the two remaining for your point to point link.Currently PursuingWGU (BS in IT Network Administration) - 52%| CCIE:Voice Written - 0% (0/200 Hours)mikej412 wrote:Cisco Networking isn't just a job, it's a Lifestyle.
-
Optionsranny17 Member Posts: 4 ■□□□□□□□□□thanks..am really trying to sink subnetting in...but i guess i get a lot of trouble with class B networks
-
Optionsalan2308 Member Posts: 1,854 ■■■■■■■■□□Just keep practicing, you'll get it. Here's one place to go for more practice, and there are plenty more like it out there.
subnettingquestions.com