SDM Download
RS_MCP
Member Posts: 352
Hi,
Can anyone assit with me downloading SDM and also confguring my 2611XM Router to support it?
Thanks
Can anyone assit with me downloading SDM and also confguring my 2611XM Router to support it?
Thanks
Comments
-
RS_MCP Member Posts: 352Do I have the correct files installed on my Router to run SDM & not SDM Express?
Router#show flash:
System flash directory:
File Length Name/status
1 25279520 c2600-spservicesk9-mz.124-5.bin
2 1038 home.shtml
3 2754 sdmconfig-26xx.cfg
4 112640 home.tar
5 931840 es.tar
6 1505280 common.tar
[27833460 bytes used, 5196680 available, 33030140 total]
32768K bytes of processor board System flash (Read/Write)
Thanks for your help in advance. -
peanutnoggin Member Posts: 1,096 ■■■□□□□□□□Honestly, I cannot remember the files needed on the router to run SDM. I've always installed it directly on my PC as opposed to using router CPU for such a buggy program. If you checkout the link that Mike posted above, it lists the files needed in the router's flash. HTH.
-PeanutWe cannot have a superior democracy with an inferior education system!
-Mayor Cory Booker -
RS_MCP Member Posts: 352On the Cisco link:
Router# show flash:
If SDM software is present, you see output resembling the following:
System flash directory:
File Length Name/status
1 5148536 c831-k9o3y6-mz.122-13.ZH1.bin
2 14617 sdm.shtml
3 669 sdmconfig-83x.cfg
4 2290688 sdm.tar
5 14617 sdm.shtml.hide
6 1446 home.html
7 214016 home.tar
8 1446 home.html.hide
[7686035 bytes used, 17434224 available, 24903680 total]
24576K bytes of processor board System flash (Read/Write)
Note The files that you see when you enter the show flash: command may differ slightly from the list shown
Files might differ on various Routers. -
wheez Member Posts: 74 ■■□□□□□□□□You need sdm.tar for the full SDM. Es.tar, which you currently have, is for SDM express.WIP: Considering cert path.. :-)