VTP V2 question

I have 2950 switch and a fresh reload. I do the following

S2#show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 128
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name : home
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled

Now the question is since VTP version says it is running 2 why does
VTP V2 Mode say disable?

THanks for any help.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

burbankmarc

VTP Version : 2 means it's capable of vtp v2.

Mode Disabled means it's currently running v1.

notgoing2fail

burbankmarc wrote: »

VTP Version : 2 means it's capable of vtp v2.

Mode Disabled means it's currently running v1.

Exactly what he said.

By default, switches use V1....so you have to enable version 2.

billscott92787

That definitely was in the CCNA materials

. But +2 for the reasoning above. Enable using vtp version 2 command. Then when you check VTP status you should see

VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 255
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled

Dilbert65

Thanks for the replies