Home Lab

Im finishing up my ccna and wanted to get everyone's opionon on the equipment i have and if it will be sufficient for the ccnp. I was planning on using gns3 along with what i have. Please give me your feedback on upgrades, new equimpment, WIC's etc that will improve my current set up, or do you think what i have is enough. Thanks!

1 2610xm w/ 1 WIC 2A/S IOS c2600-advipservicesk9-mz.124-1c.bin
1 2610xm w/1 WIC 2A/S IOS c2600-advipservicesk9-mz.124-1c.bin
2 2610 w/1 WIC T1 csu/dsu IOS c2600-ik9o3s3-mz.123-24.bin
1 2620xm w/ 1 WIC T1 csu/dsu, 1 WIC T2,1 NM 1FE-TX IOS c2600-advipservicesk9-mz.124-1c.bin
1 2620 w/1 NM-1e Older IOS
2 2950
1 3750 48 port c3750-ipbase-mz.122-35.SE5

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

fly351

Check this site out for comparing IOS's. From my understanding, you almost have to have 12.4T... and if I am not mistaken, 2610xm's don't support it (I may be wrong).

CCNP Router IOS Features

burbankmarc

That 3750 is effin' nice.

Other than that what you can't do with your current routers can be done with dynamips.

Here's a breakdown of what I used:

BSCI = dynamips with up to 20 router topologies
BCMSN = 2x3550, 2x2950, 1x3640
TSHOOT = 2x3550, 2x2950, dynamips for the routers, and also the IPv6 stuff

billscott92787

burbankmarc wrote: »

That 3750 is effin' nice.

Other than that what you can't do with your current routers can be done with dynamips.

Here's a breakdown of what I used:

BSCI = dynamips with up to 20 router topologies
BCMSN = 2x3550, 2x2950, 1x3640
TSHOOT = 2x3550, 2x2950, dynamips for the routers, and also the IPv6 stuff

+1 for this recommendation. You got everything you need, whatever you lack hardware wise just make it up with Dynamips. You will be fine. Tie it into your current equipment and plug away

brewoz40

Yea i got lucky with the 3750, wish i had one more..of course..haha. As far as the IOS, is 12.4T necessary? it does look like the 2610xm does support 12.4(15)T13, this is what i found on cisco's site:

ADVANCED ENTERPRISE SERVICES
c2600-adventerprisek9-mz.124-15.T13.bin
Release Date: 09/Apr/2010

Size: 33769.93 KB (34580404 bytes)
Minimum Memory: DRAM:256 MB Flash:48 MB

or

ADVANCED IP SERVICES
c2600-advipservicesk9-mz.124-15.T13.bin
Release Date: 09/Apr/2010

Size: 32372.91 KB (33149852 bytes)
Minimum Memory: DRAM:192 MB Flash:48 MB

Which one?

pitviper

Do you have enough flash? Those 48MB modules are real tough to come by. Worst case - boot the IOS off of a TFTP server. I had to do this in my original voice lab to save space and it worked fine.

zerglings

Can I have your 3750? Pretty please? c",)