nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

HSRP,VRRP and udp forward protocol

srikanth.ccna2010

standby router or virtual router also allowing udp packets.so at the destination i am getting duplicate packet.how to avoid duplicate packet?

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

CCNAwannabe

srikanth.ccna2010 wrote: »

standby router or virtual router also allowing udp packets.so at the destination i am getting duplicate packet.how to avoid duplicate packet?

Not quite sure what you mean by duplicate packets.. HSRP and VRRP don't load balance. (I know you can load balance different VLANS), but you would still only have one gateway mac you are sending to. Which is the case with HSRP VRRP GLBP.

keenon

srikanth.ccna2010 wrote: »

standby router or virtual router also allowing udp packets.so at the destination i am getting duplicate packet.how to avoid duplicate packet?

your going to have to post the configurations from the devices participating in this setup