HELP my 1841 is crazy?

itdaddy

Hey guys finall got a sandisk CF reader and formated the CF to fat and
added the IOS bin file and it is loading from flash but stops at the FA0/0
I guess my flash from last time was okay. Is there something with my 1841 gone bad? why does it just stop???

Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0x26adf30
Self decompressing the image : ################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0X003AA110 public buffer pools
0X00211000 public particle pools
0X00020000 Crypto module pools
0X0002 0X0001A800 Card in slot 0
0X000021B8 Onboard USB
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 1692398 bytes to IO Memory.
PMem allocated: 123731968 bytes; IOMem allocated: 10485760 bytes
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2)
Technical Support: Support and Documentation - Cisco Systems
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 03-Sep-10 03:56 by prod_rel_team

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
Export Compliance Product Report Application
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 1841 (revision 5.0) with 120832K/10240K bytes of memory.
Processor board ID FCZ093311R1
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
mmi polling-interval 60
^
% Invalid input detected at '^' marker.
no mmi auto-configure
^
% Invalid input detected at '^' marker.
no mmi pvc
^
% Invalid input detected at '^' marker.
mmi snmp-timeout 180
^
% Invalid input detected at '^' marker.
no ftp-server write-enable
^
% Invalid input detected at '^' marker.
*Feb 8 22:27:12.943: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Feb 8 22:27:12.947: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Feb 8 22:27:14.307: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down
*Feb 8 22:27:15.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down
*Feb 8 22:27:15.763: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
*Feb 8 22:27:15.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
*Feb 8 22:27:18.319: %SYS-5-CONFIG_I: Configured from memory by console
*Feb 8 22:27:19.907: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Feb 8 22:27:19.907: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
*Feb 8 22:27:20.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
*Feb 8 22:27:23.079: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2)
Technical Support: Support and Documentation - Cisco Systems
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 03-Sep-10 03:56 by prod_rel_team
*Feb 8 22:27:23.083: %SNMP-5-COLDSTART: SNMP agent on host ParkDrGateway1 is undergoing a cold start
*Feb 8 22:27:23.487: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Feb 8 22:27:23.487: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Feb 8 22:27:23.487: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Feb 8 22:27:23.487: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Feb 8 22:27:25.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down

(stops dead here what do I do?)

itdaddy

does it look like it is reading an old config or am I reading it wrong?
this seemed to happend on the old CF as well thought thd flash was bad but now I am thinking
maybe the router went bad itis an 1841 cisco hard to believe it is a brick now????

SteveO86

Break Into ROMMON mode and reload the IOS? Double checking the Config-register making sure it's booting from Flash.

(or try to specify the boot-system flashxxxxxx command)

itdaddy

Steve what I did was set it to boot from flash and when I reboot it without being in ROMMON it now boots on its own to flash but always stops here even on the old CF with IOS it did same thing. I got another flash thinking the flash was the issue now I am thinking the 1841 is a brick. It is hard to believe since I have done nothing to this device? like I have older cisco devices than this and they have lasted longer....kind of sick thinking how it doesnt seem to go behone that Fa0/0 and just stops
just dumbfounded really..thouight maybe someone had seen this before. Hey thanks steve. config register is set to 0x2102 cause I did the confreg 0x2102 and reset router and it seemed to boot from flash and uncompress but stops after all that it just torks me off. Thanks steve

tiersten

Go to ROMMON and alter the config register so it doesn't use the configuration.