Options
Host to set-up existing hardware as Lab?
Gteck
Registered Users Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
I am a newby to the CCNA, I have been doing all the readings and practice exams. I now want to set up a Lab and have access to the following devices,
1. Can I set-up these equipment as a CCNA Lab
2. What kind of cables do I need to inter-connect the routers given the available modules/ports.
Device list:
- Routers
1. 2610 xm (IOS Ver. 12.1 )
W1 = wic 1B-u; w0= wic 1T-serial.... Fa0; console; aux.. etc
2. 2801v1 (IOS Ver. 12.4)
Slot 0 = empty; Slot 1 = W1DSU-T1; slot 2 = W1DSU-T1; Slot 3 = modem wic 1am... Fe0/0; Fe0/1..... etc
3. 3640-is-m (IOS Ver. 12.2)
wo= serial Wic 1t; w1 = empty and a 1 HSSI (HSSI 0); Fa 0/0; Fa 0/1.
-switches
I also have the following switches available: two 3500xl no fiber Gbic; 1 3560 no Gbic, and a 3920.
What are my options for setting up a lab with this equipment?
1. Can I set-up these equipment as a CCNA Lab
2. What kind of cables do I need to inter-connect the routers given the available modules/ports.
Device list:
- Routers
1. 2610 xm (IOS Ver. 12.1 )
W1 = wic 1B-u; w0= wic 1T-serial.... Fa0; console; aux.. etc
2. 2801v1 (IOS Ver. 12.4)
Slot 0 = empty; Slot 1 = W1DSU-T1; slot 2 = W1DSU-T1; Slot 3 = modem wic 1am... Fe0/0; Fe0/1..... etc
3. 3640-is-m (IOS Ver. 12.2)
wo= serial Wic 1t; w1 = empty and a 1 HSSI (HSSI 0); Fa 0/0; Fa 0/1.
-switches
I also have the following switches available: two 3500xl no fiber Gbic; 1 3560 no Gbic, and a 3920.
What are my options for setting up a lab with this equipment?