Trying to set up a sim wan link on 1760

Futura

Hi Guys,

I have 2 1760's that had the VIC 2B-NT/TE cards installed, I pulled them out and replaced them with WIC 1T cards with a plan to connect them with a DTE/DCE cable.

Problem is, they don't show up! see below

Router#sh ip interface brief
Interface IP-Address OK? Method Status Prot
ocol
FastEthernet0/0 unassigned YES unset administratively down down

Virtual-Access1 unassigned YES unset up up

Missing Serials!.

Any ideas?

Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y7-M), Version 12.2(15)T14, RELEASE SOFTWARE (
fc4)
Technical Support: Support and Documentation - Cisco Systems
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 28-Aug-04 02:51 by cmong
Image text-base: 0x80008120, data-base: 0x81466498

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y7-M), Version 12.2(15)T14, RELEASE SOFTWARE (fc4)

Router uptime is 40 minutes
System returned to ROM by reload
System image file is "flash:c1700-sv8y7-mz.122-15.T14.bin"

cisco 1760 (MPC860P) processor (revision 0x500) with 114688K/16384K bytes of mem
ory.
Processor board ID FOC08371M8R (1856070771), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)


Many Thanks

Futura

Ignore me, I had the card installed in a voice only slot.

Nothing like real problems for learning.