Source-Filtering

cybernet005

Anybody test source-filtering feature? I configured source-filtering on router but after committing, i can't ping the remote host connected directly?

MP05#show interfaces ae7
description ->MP06
flexible-vlan-tagging;
mtu 1600;
encapsulation flexible-ethernet-services;
aggregated-ether-options {
source-filtering;
source-address-filter {
00:21:59:af:af:c7;
}
lacp {
active;
}
}
unit 10 {
description ->Mp06-ae7.10;
vlan-id 10;
family inet {
address 10.0.0.1/30;
}
family iso;
family mpls;
}

MP06> show interfaces ae7
Physical interface: ae7, Enabled, Physical link is Up
Interface index: 181, SNMP ifIndex: 583
Description: ->MP05
Link-level type: 52, MTU: 1600, Speed: 4000mbps, BPDU Error: None, MAC-REWRITE Error: None,
Loopback: Disabled, Source filtering: Disabled, Flow control: Disabled, Minimum links needed: 1,
Minimum bandwidth needed: 0
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Current address: 00:21:59:af:af:c7, Hardware address: 00:21:59:af:af:c7
Last flapped : 2011-02-24 15:03:56 WIT (6d 06:23 ago)
Input rate : 136728 bps (24 pps)
Output rate : 53328 bps (8 pps)

MP06# show interfaces ae7
description ->MP05
flexible-vlan-tagging;
mtu 1600;
encapsulation flexible-ethernet-services;
aggregated-ether-options {
lacp {
active;
}
}
unit 10 {
description ->HN-MP05;
vlan-id 10;
family inet {
address 10.0.0.2/30;
}
family iso;
family mpls;
}

chongch01

Hi,

Can you try on a physical interface 1st instead of logical? (maybe a fe interface)

Thanks