error in tech exam notes

Webmaster,
I came across this tonight as I was studying. You might be aware of it but if your note here it is.

page 14
17. How are stations in a 10Base5 network attached to the network?
a. Using MSAUs
b. Using Hubs
c. Using T-connectors
d. Using repeaters

answer:
Question 17. Correct answer: c. In 10Base2 networks T-connector connect clients to the main
cable segment.

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

RussS

jasonandashley1 wrote:

Webmaster,
I came across this tonight as I was studying. You might be aware of it but if your note here it is.

page 14
17. How are stations in a 10Base5 network attached to the network?
a. Using MSAUs
b. Using Hubs
c. Using T-connectors
d. Using repeaters

answer:
Question 17. Correct answer: c. In 10Base2 networks T-connector connect clients to the main
cable segment.

Umm - is the 10Base5 in the questions part and 10Base2 in the answer part the error?

jasonandashley1

yes , the question should say 10base2 since the answer it t conector.

Webmaster

Hmmm that has been pointed out to me before and I thought I corrected it

. 10Base5 should be indeed 10Base2 in the question. As you probably noticed, I copied question 16 but did not change the 5 into a 2....

www.techexams.net/technotes/networkplus/pdf/errata.htm

Thanks for pointing it out and I apologize if it caused any confusion.

Johan