Question for GNS3 gurus / VPC

I have a vpcs host connected to my router to simulate pings, tracerouts etc... in GNS3

ip 192.168.2.1 192.168.2.1 24
ip 2001:2::1 64

How do I specify the default gateway for the ipv6?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

tomaifauchai

If you're talking about a default route in the router, the syntax would be something like

R1(config)#ipv6 route ::0/0 fa0/0 2001::2:2

But not sure if that's what you want

CodeBlox

Hes asking out to configure the IPv6 default gateway with VPCS. I'm not sure how.

mattau

I have played around with this also. I have no idea if this is right but it seemed to work for me

ipv6 unicast routing command on the router you want as the DG in global config mode.

then leave every else as is. See if that works. there is probably another way but i believe that command tells everyone that " you can route through me "

mrblackmamba343

tomaifauchai wrote: »

If you're talking about a default route in the router, the syntax would be something like

R1(config)#ipv6 route ::0/0 fa0/0 2001::2:2

But not sure if that's what you want

I'm talking about ipv6 default route on the host