Client DHCP issues with WLC4136 Controller
hermeszdata
Member Posts: 225
Well, I managed to get my WLC4136 WLAN controller up and running ... somewhat!
For the past couple of days I have been banging my head on the desk trying to figure this out but have not gotten any where. I am able to configure the WLC via telnet/ssh and via the GUI. APs register without issues and I am able to configure those. Wired clients are able to access local devices and the internet. Wireless Clients connect to the AP(s) but do not obtain a DHCP address!
Current topology includes:
c2911 Router
c3550 Switch as Distribution Switch
c3560 PoE 24 as Wireless COre switch
WLC4136 Wireless Lan COntroller
AIR-AP1010-A-K9 APs
c2811 Router Configs
Any suggestions?
John
For the past couple of days I have been banging my head on the desk trying to figure this out but have not gotten any where. I am able to configure the WLC via telnet/ssh and via the GUI. APs register without issues and I am able to configure those. Wired clients are able to access local devices and the internet. Wireless Clients connect to the AP(s) but do not obtain a DHCP address!
Current topology includes:
c2911 Router
c3550 Switch as Distribution Switch
c3560 PoE 24 as Wireless COre switch
WLC4136 Wireless Lan COntroller
AIR-AP1010-A-K9 APs
c2811 Router Configs
version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname CO172Rtr ! boot-start-marker boot-end-marker ! no logging buffered ! no aaa new-model clock timezone mst -7 clock summer-time MDT recurring voice-card 3 ! ip cef ! ! no ip dhcp use vrf connected ip dhcp excluded-address 10.0.0.1 10.0.0.100 ip dhcp excluded-address 10.0.100.1 10.0.100.99 ip dhcp excluded-address 172.16.0.1 172.16.0.10 ip dhcp excluded-address 192.168.255.1 192.168.255.5 ! ip dhcp pool qiGuestWLAN network 10.0.0.0 255.255.252.0 default-router 10.0.0.1 dns-server 4.2.2.2 ! ip dhcp pool CO172WAP network 10.0.100.0 255.255.255.0 default-router 10.0.100.1 ! ip dhcp pool CO172HN network 172.16.0.0 255.255.255.0 default-router 172.16.0.1 dns-server 205.171.3.65 205.171.2.65 ! ip dhcp pool Service network 192.168.255.0 255.255.255.0 default-router 192.168.255.1 ! ! ! multilink bundle-name authenticated ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! ! ! interface FastEthernet0/1 no shut ! ! interface FastEthernet0/1.10 description Hotel Management Network Connection Through Workgroup Switch $FW_INSIDE$ encapsulation dot1Q 10 ip address 172.16.0.1 255.255.255.0 ip nat inside ip virtual-reassembly no shut ! interface FastEthernet0/1.11 description NetManagementLAN $FW_INSIDE$ encapsulation dot1Q 11 native ip address 192.168.255.1 255.255.255.0 ip nat inside ip virtual-reassembly no shut ! interface FastEthernet0/1.100 description $Guest WLAN$ encapsulation dot1Q 100 ip address 10.0.100.1 255.255.255.0 ip nat inside ip virtual-reassembly no shut ! interface FastEthernet0/1.101 enc dot1q 101 ip address 10.0.0.1 255.255.252.0 ip nat inside ip virtual-reassembly no shutdown ! ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 173.164.45.206 ! ! ip http server ip http authentication local ip http secure-server ip nat inside source list CO172NAT interface FastEthernet0/0 overload ! ip access-list standard CO172NAT permit 10.0.0.0 0.0.3.255 permit 10.0.100.0 0.0.0.255 permit 172.16.0.0 0.0.0.255 permit 192.168.255.0 0.0.0.7 ! ! ! ! ! ! ! line con 0 exec-timeout 15 0 login local line aux 0 line vty 0 4 access-class CO172vtySecure in exec-timeout 15 0 logging synchronous login local transport input telnet ssh ! ntp clock-period 17180169 ntp server 192.43.244.18 endc3550 Switch (This is the Primary Switch)
CO172SW#sh run Building configuration... Current configuration : 5749 bytes ! ! No configuration change since last restart ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname CO172SW ! ! no aaa new-model ip subnet-zero ! ! ! ! ! ! spanning-tree mode pvst spanning-tree etherchannel guard misconfig spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! ! ! interface FastEthernet0/1 switchport access vlan 2 switchport mode access ! interface FastEthernet0/2 switchport access vlan 2 switchport mode access ! interface FastEthernet0/3 switchport access vlan 2 switchport mode access ! interface FastEthernet0/4 switchport access vlan 2 switchport mode access shutdown ! interface FastEthernet0/5 switchport mode dynamic desirable shutdown ! interface FastEthernet0/6 switchport mode dynamic desirable shutdown ! interface FastEthernet0/7 switchport mode dynamic desirable shutdown ! interface FastEthernet0/8 switchport mode dynamic desirable shutdown ! interface FastEthernet0/9 switchport trunk encapsulation dot1q switchport trunk native vlan 11 switchport mode trunk ! interface FastEthernet0/10 switchport access vlan 11 switchport mode access spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 11 switchport mode access ! interface FastEthernet0/12 switchport access vlan 10 switchport mode access ! interface FastEthernet0/13 switchport access vlan 10 switchport mode access ! interface FastEthernet0/14 switchport access vlan 10 switchport mode access spanning-tree portfast spanning-tree bpdufilter enable ! interface FastEthernet0/15 switchport access vlan 10 switchport mode access shutdown ! interface FastEthernet0/16 switchport access vlan 10 switchport mode access shutdown ! interface FastEthernet0/17 switchport trunk encapsulation dot1q switchport trunk native vlan 11 switchport mode trunk ! interface FastEthernet0/18 switchport access vlan 11 switchport mode access spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 10 switchport mode access ! interface FastEthernet0/20 switchport access vlan 10 switchport mode dynamic desirable shutdown ! interface FastEthernet0/21 switchport access vlan 100 switchport mode dynamic desirable shutdown ! interface FastEthernet0/22 switchport access vlan 100 switchport mode access ! interface FastEthernet0/23 switchport access vlan 100 switchport mode access ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport trunk native vlan 11 switchport mode trunk ! interface GigabitEthernet0/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface GigabitEthernet0/2 switchport trunk encapsulation dot1q switchport trunk native vlan 11 switchport mode trunk ! interface Vlan1 no ip address no ip route-cache ! interface Vlan11 ip address 192.168.255.2 255.255.255.248 ! ip default-gateway 192.168.255.1 ip classless ip http server ip http authentication local ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 15 0 login local line vty 0 4 exec-timeout 15 0 login local transport input telnet line vty 5 15 no login ! ntp clock-period 17180210 ntp server 192.43.244.18 ntp server 192.168.255.1 end CO172SW#c3560 Config (this switch is remote and powers the APs)
CO172WCore#sh run Building configuration... Current configuration : 8001 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname CO172WCore ! boot-start-marker boot-end-marker ! no aaa new-model system mtu routing 1500 ip subnet-zero ! ! ! ! ! ! ! ! ! spanning-tree mode pvst spanning-tree etherchannel guard misconfig spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! interface FastEthernet0/1 switchport trunk encapsulation dot1q switchport trunk native vlan 100 switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport trunk native vlan 100 switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk spanning-tree portfast ! interface FastEthernet0/3 switchport trunk encapsulation dot1q switchport trunk native vlan 100 switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk spanning-tree portfast ! interface FastEthernet0/4 switchport trunk encapsulation dot1q switchport trunk native vlan 100 switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk spanning-tree portfast ! ! !Output cut! All ports configured same ! ! interface FastEthernet0/23 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk shutdown ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport trunk native vlan 11 switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk switchport nonegotiate ! interface GigabitEthernet0/1 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,11,100,101,1002-1005 switchport mode trunk ! interface GigabitEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address no ip route-cache no ip mroute-cache ! interface Vlan11 ip address 192.168.255.3 255.255.255.248 ! ip default-gateway 192.168.255.1 ip classless ip http server ip http authentication local ip http secure-server ! ! ! ! control-plane ! ! ! line con 0 login local stopbits 1 line vty 0 4 login local line vty 5 15 login ! end CO172WCore#WLC4136 Configuration
(Cisco Controller) >show run Press Enter to continue... System Inventory Switch Description............................... Cisco Controller Machine Model.................................... WLC4136 Serial Number.................................... FLS0935H00L Burned-in MAC Address............................ 00:0B:85:33:3B:60 Gig Ethernet/Fiber Card.......................... Present Crypto Accelerator 1............................. Absent 　 System Information Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 3.2.210.0 RTOS Version..................................... 3.2.210.0 Bootloader Version............................... 3.2.210.0 Build Type....................................... DATA + WPS System Name...................................... CO)172WLC System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.14179 IP Address....................................... 10.0.100.21 System Up Time................................... 0 days 2 hrs 44 mins 35 secs Configured Country............................... US - United States Operating Environment............................ Commercial (0 to 40 C) Internal Temp Alarm Limits....................... 0 to 65 C Internal Temperature............................. +47 C State of 802.11b Network......................... Enabled State of 802.11a Network......................... Enabled Number of WLANs.................................. 2 3rd Party Access Point Support................... Disabled Number of Active Clients......................... 1 　 Switch Configuration 802.3x Flow Control Mode......................... Disable Current LWAPP Transport Mode..................... Layer 3 LWAPP Transport Mode after next switch reboot.... Layer 3 FIPS prerequisite features....................... Disabled 　 Network Information RF-Network Name............................. co172 Web Mode.................................... Disable Secure Web Mode............................. Enable Secure Shell (ssh).......................... Enable Telnet...................................... Disable Ethernet Multicast Mode..................... Disable User Idle Timeout........................... 300 seconds ARP Idle Timeout............................ 300 seconds ARP Unicast Mode............................ Disabled Cisco AP Default Master..................... Disable Mgmt Via Wireless Interface................. Disable Bridge AP Zero Config....................... Enable Bridge Shared Secret........................ youshouldsetme Allow Old Bridging Aps To Authenticate...... Enable Over The Air Provisioning of AP's........... Enable Mobile Peer to Peer Blocking................ Enable Apple Talk ................................. Disable AP Fallback ................................ Enable Web Auth Redirect Ports .................... 80 Fast SSID Change ........................... Disabled Port Summary STP Admin Physical Physical Link Link Mcast Pr Type Stat Mode Mode Status Status Trap Appliance POE -- ------- ---- ------- ---------- ---------- ------ ------- --------- ------- 1 Normal Forw Enable Auto 1000 Full Up Enable Enable N/A 　 AP Summary AP Name Slots AP Model Ethernet MAC Location Port ------------------ ----- ------------------- ----------------- ---------------- ---- Guest4 2 AP1010 00:0b:85:8d:83:a0 default_location 1 　 AP Config Cisco AP Identifier.............................. 7 Cisco AP Name.................................... Guest4 AP Regulatory Domain............................. -A Switch Port Number .............................. 1 MAC Address...................................... 00:0b:85:8d:83:a0 IP Address Configuration......................... DHCP IP Address....................................... 10.0.100.100 IP NetMask....................................... 255.255.255.0 Gateway IP Addr.................................. 10.0.100.1 Cisco AP Location................................ default_location Cisco AP Group Name.............................. Guest_HSIA Primary Cisco Switch............................. Secondary Cisco Switch........................... Tertiary Cisco Switch............................ Administrative State ............................ ADMIN_ENABLED Operation State ................................. REGISTERED Mirroring Mode .................................. Disabled AP Mode ......................................... Local Remote AP Debug ................................. Disabled S/W Version .................................... 3.2.210.0 Boot Version ................................... 2.1.78.0 Mini IOS Version ................................ -- Stats Reporting Period .......................... 180 LED State........................................ Enabled Number Of Slots.................................. 2 AP Model......................................... AP1010 AP Serial Number................................. WCN110600W9 AP Certificate Type.............................. Manufacture Installed Attributes for Slot 1 Radio Type................................... RADIO_TYPE_80211g Administrative State ........................ ADMIN_ENABLED Operation State ............................. UP WLAN Override ............................... Enabled CellId ...................................... 0 Station Configuration Configuration ............................. AUTOMATIC Number Of WLANs ........................... 1 Medium Occupancy Limit .................... 100 CFP Period ................................ 4 CFP MaxDuration ........................... 60 BSSID ..................................... 00:0b:85:8d:83:a0 Operation Rate Set 1000 Kilo Bits........................... MANDATORY 2000 Kilo Bits........................... MANDATORY 5500 Kilo Bits........................... MANDATORY 11000 Kilo Bits.......................... MANDATORY 6000 Kilo Bits........................... SUPPORTED 9000 Kilo Bits........................... SUPPORTED 12000 Kilo Bits.......................... SUPPORTED 18000 Kilo Bits.......................... SUPPORTED 24000 Kilo Bits.......................... SUPPORTED 36000 Kilo Bits.......................... SUPPORTED 48000 Kilo Bits.......................... SUPPORTED 54000 Kilo Bits.......................... SUPPORTED Beacon Period ............................. 100 DTIM Period ............................... 1 Fragmentation Threshold ................... 2346 Multi Domain Capability Implemented ....... TRUE Multi Domain Capability Enabled ........... TRUE Country String ............................ US Multi Domain Capability Configuration ............................. AUTOMATIC First Chan Num ............................ 1 Number Of Channels ........................ 11 MAC Operation Parameters Configuration ............................. AUTOMATIC RTS Threshold ............................. 2347 Short Retry Limit ......................... 7 Long Retry Limit .......................... 4 Fragmentation Threshold ................... 2346 Maximum Tx MSDU Life Time ................. 512 Maximum Rx Life Time ...................... 512 Tx Power Num Of Supported Power Levels ............. 5 Tx Power Level 1 .......................... 20 dBm Tx Power Level 2 .......................... 17 dBm Tx Power Level 3 .......................... 14 dBm Tx Power Level 4 .......................... 11 dBm Tx Power Level 5 .......................... 8 dBm Tx Power Configuration .................... CUSTOMIZED Current Tx Power Level .................... 3 Phy OFDM parameters Configuration ............................. CUSTOMIZED Current Channel ........................... 11 TI Threshold .............................. -50 Antenna Type............................... INTERNAL_ANTENNA Internal Antenna Gain (in .5 dBm units).... 11 Diversity.................................. DIVERSITY_ENABLED Performance Profile Parameters Configuration ............................. AUTOMATIC Interference threshold..................... 10 % Noise threshold............................ -70 dBm RF utilization threshold................... 80 % Data-rate threshold........................ 1000000 bps Client threshold........................... 12 clients Coverage SNR threshold..................... 12 dB Coverage exception level................... 25 % Client minimum exception level............. 3 clients Rogue Containment Information Containment Count............................ 0 Cisco AP Identifier.............................. 7 Cisco AP Name.................................... Guest4 AP Regulatory Domain............................. -A Switch Port Number .............................. 1 MAC Address...................................... 00:0b:85:8d:83:a0 IP Address Configuration......................... DHCP IP Address....................................... 10.0.100.100 IP NetMask....................................... 255.255.255.0 Gateway IP Addr.................................. 10.0.100.1 Cisco AP Location................................ default_location Cisco AP Group Name.............................. Guest_HSIA Primary Cisco Switch............................. Secondary Cisco Switch........................... Tertiary Cisco Switch............................ Administrative State ............................ ADMIN_ENABLED Operation State ................................. REGISTERED Mirroring Mode .................................. Disabled AP Mode ......................................... Local Remote AP Debug ................................. Disabled S/W Version .................................... 3.2.210.0 Boot Version ................................... 2.1.78.0 Mini IOS Version ................................ -- Stats Reporting Period .......................... 180 LED State........................................ Enabled Number Of Slots.................................. 2 AP Model......................................... AP1010 AP Serial Number................................. WCN110600W9 AP Certificate Type.............................. Manufacture Installed Attributes for Slot 0 Radio Type................................... RADIO_TYPE_80211a Administrative State ........................ ADMIN_ENABLED Operation State ............................. UP WLAN Override ............................... Disabled CellId ...................................... 0 Station Configuration Configuration ............................. AUTOMATIC Number Of WLANs ........................... 0 Medium Occupancy Limit .................... 100 CFP Period ................................ 4 CFP MaxDuration ........................... 60 BSSID ..................................... 00:0b:85:8d:83:a0 Operation Rate Set 6000 Kilo Bits........................... MANDATORY 9000 Kilo Bits........................... SUPPORTED 12000 Kilo Bits.......................... MANDATORY 18000 Kilo Bits.......................... SUPPORTED 24000 Kilo Bits.......................... MANDATORY 36000 Kilo Bits.......................... SUPPORTED 48000 Kilo Bits.......................... SUPPORTED 54000 Kilo Bits.......................... SUPPORTED Beacon Period ............................. 100 DTIM Period ............................... 1 Fragmentation Threshold ................... 2346 Multi Domain Capability Implemented ....... TRUE Multi Domain Capability Enabled ........... TRUE Country String ............................ US Multi Domain Capability Configuration ............................. AUTOMATIC First Chan Num ............................ 36 Number Of Channels ........................ 4 MAC Operation Parameters Configuration ............................. AUTOMATIC RTS Threshold ............................. 2347 Short Retry Limit ......................... 7 Long Retry Limit .......................... 4 Fragmentation Threshold ................... 2346 Maximum Tx MSDU Life Time ................. 512 Maximum Rx Life Time ...................... 512 Tx Power Num Of Supported Power Levels ............. 5 Tx Power Level 1 .......................... 20 dBm Tx Power Level 2 .......................... 17 dBm Tx Power Level 3 .......................... 14 dBm Tx Power Level 4 .......................... 11 dBm Tx Power Level 5 .......................... 8 dBm Tx Power Configuration .................... AUTOMATIC Current Tx Power Level .................... 1 Phy OFDM parameters Configuration ............................. AUTOMATIC Current Channel ........................... 161 TI Threshold .............................. -50 Antenna Type............................... INTERNAL_ANTENNA Internal Antenna Gain (in .5 dBm units).... 11 AntennaMode................................ ANTENNA_OMNI Performance Profile Parameters Configuration ............................. AUTOMATIC Interference threshold..................... 10 % Noise threshold............................ -70 dBm RF utilization threshold................... 80 % Data-rate threshold........................ 1000000 bps Client threshold........................... 12 clients Coverage SNR threshold..................... 16 dB Coverage exception level................... 25 % Client minimum exception level............. 3 clients Rogue Containment Information Containment Count............................ 0 　 AP Airewave Director Configuration Number Of Slots.................................. 2 AP Name.......................................... Guest4 MAC Address...................................... 00:0b:85:8d:83:a0 Radio Type..................................... RADIO_TYPE_80211b/g Noise Information Noise Profile................................ PASSED Channel 1.................................... -84 dBm Channel 2.................................... -78 dBm Channel 3.................................... -86 dBm Channel 4.................................... -89 dBm Channel 5.................................... -95 dBm Channel 6.................................... -97 dBm Channel 7.................................... -95 dBm Channel 8.................................... -94 dBm Channel 9.................................... -94 dBm Channel 10................................... -93 dBm Channel 11................................... -93 dBm Interference Information Interference Profile......................... PASSED Channel 1.................................... -75 dBm @ 1 % busy Channel 2.................................... -128 dBm @ 0 % busy Channel 3.................................... -128 dBm @ 0 % busy Channel 4.................................... -128 dBm @ 0 % busy Channel 5.................................... -128 dBm @ 0 % busy Channel 6.................................... -86 dBm @ 8 % busy Channel 7.................................... -84 dBm @ 4 % busy Channel 8.................................... -128 dBm @ 0 % busy Channel 9.................................... -128 dBm @ 0 % busy Channel 10................................... -87 dBm @ 1 % busy Channel 11................................... -85 dBm @ 4 % busy Load Information Load Profile................................. PASSED Receive Utilization.......................... 0 % Transmit Utilization......................... 0 % Channel Utilization.......................... 6 % Attached Clients............................. 0 clients Coverage Information Coverage Profile............................. PASSED Failed Clients............................... 0 clients Client Signal Strengths RSSI -100 dbm................................ 0 clients RSSI -92 dbm................................ 0 clients RSSI -84 dbm................................ 0 clients RSSI -76 dbm................................ 0 clients RSSI -68 dbm................................ 0 clients RSSI -60 dbm................................ 0 clients RSSI -52 dbm................................ 1 clients Client Signal To Noise Ratios SNR 0 dbm................................. 0 clients SNR 5 dbm................................. 0 clients SNR 10 dbm................................. 0 clients SNR 15 dbm................................. 0 clients SNR 20 dbm................................. 0 clients SNR 25 dbm................................. 0 clients SNR 30 dbm................................. 0 clients SNR 35 dbm................................. 0 clients SNR 40 dbm................................. 1 clients SNR 45 dbm................................. 0 clients Nearby APs Radar Information RF Parameter Recommendations Power Level.................................. 3 RTS/CTS Threshold............................ 2347 Fragmentation Tnreshold...................... 2346 Antenna Pattern.............................. 0 Number Of Slots.................................. 2 AP Name.......................................... Guest4 MAC Address...................................... 00:0b:85:8d:83:a0 Radio Type..................................... RADIO_TYPE_80211a Noise Information Noise Profile................................ PASSED Channel 36................................... -93 dBm Channel 40................................... -92 dBm Channel 44................................... -93 dBm Channel 48................................... -92 dBm Channel 52................................... -93 dBm Channel 56................................... -93 dBm Channel 60................................... -93 dBm Channel 64................................... -92 dBm Channel 149.................................. -98 dBm Channel 153.................................. -98 dBm Channel 157.................................. -99 dBm Channel 161.................................. -100 dBm Channel 165.................................. -100 dBm Interference Information Interference Profile......................... PASSED Channel 36................................... -128 dBm @ 0 % busy Channel 40................................... -128 dBm @ 0 % busy Channel 44................................... -128 dBm @ 0 % busy Channel 48................................... -128 dBm @ 0 % busy Channel 52................................... -128 dBm @ 0 % busy Channel 56................................... -128 dBm @ 0 % busy Channel 60................................... -128 dBm @ 0 % busy Channel 64................................... -128 dBm @ 0 % busy Channel 149.................................. -128 dBm @ 0 % busy Channel 153.................................. -128 dBm @ 0 % busy Channel 157.................................. -128 dBm @ 0 % busy Channel 161.................................. -128 dBm @ 0 % busy Channel 165.................................. -128 dBm @ 0 % busy Load Information Load Profile................................. PASSED Receive Utilization.......................... 0 % Transmit Utilization......................... 0 % Channel Utilization.......................... 0 % Attached Clients............................. 0 clients Coverage Information Coverage Profile............................. PASSED Failed Clients............................... 0 clients Client Signal Strengths RSSI -100 dbm................................ 0 clients RSSI -92 dbm................................ 0 clients RSSI -84 dbm................................ 0 clients RSSI -76 dbm................................ 0 clients RSSI -68 dbm................................ 0 clients RSSI -60 dbm................................ 0 clients RSSI -52 dbm................................ 0 clients Client Signal To Noise Ratios SNR 0 dbm................................. 0 clients SNR 5 dbm................................. 0 clients SNR 10 dbm................................. 0 clients SNR 15 dbm................................. 0 clients SNR 20 dbm................................. 0 clients SNR 25 dbm................................. 0 clients SNR 30 dbm................................. 0 clients SNR 35 dbm................................. 0 clients SNR 40 dbm................................. 0 clients SNR 45 dbm................................. 0 clients Nearby APs Radar Information Channel Assignment Information Current Channel Average Energy............... unknown Previous Channel Average Energy.............. unknown Channel Change Count......................... 0 Last Channel Change Time..................... Sun May 1 13:04:19 2011 Recommendd Best Channel...................... 161 RF Parameter Recommendations Power Level.................................. 1 RTS/CTS Threshold............................ 2347 Fragmentation Tnreshold...................... 2346 Antenna Pattern.............................. 0 　 802.11A Configuration 802.11a Network.................................. Enabled 802.11a Low Band........................... Enabled 802.11a Mid Band........................... Enabled 802.11a High Band.......................... Enabled 802.11a Operational Rates 802.11a 6M Rate.............................. Mandatory 802.11a 9M Rate.............................. Supported 802.11a 12M Rate............................. Mandatory 802.11a 18M Rate............................. Supported 802.11a 24M Rate............................. Mandatory 802.11a 36M Rate............................. Supported 802.11a 48M Rate............................. Supported 802.11a 54M Rate............................. Supported Beacon Interval.................................. 100 CF Pollable mandatory............................ Disabled CF Poll Request mandatory........................ Disabled CFP Period....................................... 4 CFP Maximum Duration............................. 60 Default Channel.................................. 36 Default Tx Power Level........................... 1 DTPC Status..................................... Enabled DTIM Period...................................... 1 Fragmentation Threshold.......................... 2346 Long Retry Limit................................. 4 Maximum Rx Life Time............................. 512 Max Tx MSDU Life Time............................ 512 Medium Occupancy Limit........................... 100 Pico-Cell Status................................. Disabled RTS Threshold.................................... 2347 Short Retry Limit................................ 7 TI Threshold..................................... -50 　 802.11A Advanced Configuration AP Name Channel TxPower Level -------------------------------- ----------- ------------- Guest4 161* 1* Press Enter to continue Or <Ctl Z> to abort 802.11A Airewave Director Configuration RF Event and Performance Logging Channel Update Logging......................... Off Coverage Profile Logging....................... Off Foreign Profile Logging........................ Off Load Profile Logging........................... Off Noise Profile Logging.......................... Off Performance Profile Logging.................... Off TxPower Update Logging......................... Off Default 802.11a AP performance profiles 802.11a Global Interference threshold.......... 10 % 802.11a Global noise threshold................. -70 dBm 802.11a Global RF utilization threshold........ 80 % 802.11a Global throughput threshold............ 1000000 bps 802.11a Global clients threshold............... 12 clients 802.11a Global coverage threshold.............. 16 dB 802.11a Global coverage exception level........ 25 % 802.11a Global client minimum exception lev.... 3 clients Default 802.11a AP monitoring 802.11a Monitor Mode........................... enable 802.11a Monitor Channels....................... Country channels 802.11a AP Coverage Interval................... 180 seconds 802.11a AP Load Interval....................... 60 seconds 802.11a AP Noise Interval...................... 180 seconds 802.11a AP Signal Strength Interval............ 60 seconds Automatic Transmit Power Assignment Transmit Power Assignment Mode................. AUTO Transmit Power Update Interval................. 600 seconds Transmit Power Threshold....................... -65 dBm Transmit Power Neighbor Count.................. 3 APs Transmit Power Update Contribution............. SNI. Transmit Power Assignment Leader............... 00:0b:85:33:3b:60 Last Run....................................... 304 seconds ago Automatic Channel Assignment Channel Assignment Mode........................ AUTO Channel Update Interval........................ 600 seconds Channel Update Contribution.................... SNI. Channel Assignment Leader...................... 00:0b:85:33:3b:60 Last Run....................................... 304 seconds ago Channel Energy Levels Minimum...................................... unknown Average...................................... unknown Maximum...................................... unknown Channel Dwell Times Minimum...................................... 0 days, 00 h 39 m 09 s Average...................................... 0 days, 00 h 39 m 09 s Maximum...................................... 0 days, 00 h 39 m 09 s Radio RF Grouping 802.11a Group Mode............................. AUTO 802.11a Group Update Interval.................. 600 seconds 802.11a Group Leader........................... 00:0b:85:33:3b:60 802.11a Group Member......................... 00:0b:85:33:3b:60 802.11a Last Run............................... 304 seconds ago 　 802.11B Configuration 802.11b Network.................................. Enabled 11gSupport....................................... Enabled 802.11b/g Operational Rates 802.11b/g 1M Rate............................ Mandatory 802.11b/g 2M Rate............................ Mandatory 802.11b/g 5.5M Rate.......................... Mandatory 802.11b/g 11M Rate........................... Mandatory 802.11g 6M Rate.............................. Supported 802.11g 9M Rate.............................. Supported 802.11g 12M Rate............................. Supported 802.11g 18M Rate............................. Supported 802.11g 24M Rate............................. Supported 802.11g 36M Rate............................. Supported 802.11g 48M Rate............................. Supported 802.11g 54M Rate............................. Supported Beacon Interval.................................. 100 CF Pollable mode................................. Disabled CF Poll Request mandatory........................ Disabled CFP Period....................................... 4 CFP Maximum Duration............................. 60 Default Channel.................................. 1 Default Tx Power Level........................... 1 DTPC Status..................................... Enabled Call Admission Limit ........................... 105 G711 CU Quantum ................................. 15 DTIM Period...................................... 1 ED Threshold..................................... -50 Fragmentation Threshold.......................... 2346 Long Retry Limit................................. 4 Maximum Rx Life Time............................. 512 Max Tx MSDU Life Time............................ 512 Medium Occupancy Limit........................... 100 PBCC mandatory................................... Disabled Pico-Cell Status................................. Disabled RTS Threshold.................................... 2347 Short Preamble mandatory......................... Enabled Short Retry Limit................................ 7 　 802.11B Advanced Configuration AP Name Channel TxPower Level -------------------------------- ----------- ------------- Guest4 11 3 　 802.11B Airewave Director Configuration RF Event and Performance Logging Channel Update Logging......................... Off Coverage Profile Logging....................... Off Foreign Profile Logging........................ Off Load Profile Logging........................... Off Noise Profile Logging.......................... Off Performance Profile Logging.................... Off Transmit Power Update Logging.................. Off Default 802.11b AP performance profiles 802.11b Global Interference threshold.......... 10 % 802.11b Global noise threshold................. -70 dBm 802.11b Global RF utilization threshold........ 80 % 802.11b Global throughput threshold............ 1000000 bps 802.11b Global clients threshold............... 12 clients 802.11b Global coverage threshold.............. 12 dB 802.11b Global coverage exception level........ 25 % 802.11b Global client minimum exception lev.... 3 clients Default 802.11b AP monitoring 802.11b Monitor Mode........................... enable 802.11b Monitor Channels....................... Country channels 802.11b AP Coverage Interval................... 180 seconds 802.11b AP Load Interval....................... 60 seconds 802.11b AP Noise Interval...................... 180 seconds 802.11b AP Signal Strength Interval............ 60 seconds Automatic Transmit Power Assignment Transmit Power Assignment Mode................. AUTO Transmit Power Update Interval................. 600 seconds Transmit Power Threshold....................... -65 dBm Transmit Power Neighbor Count.................. 3 APs Transmit Power Update Contribution............. SNI. Transmit Power Assignment Leader............... 00:0b:85:33:3b:60 Last Run....................................... 371 seconds ago Automatic Channel Assignment Channel Assignment Mode........................ AUTO Channel Update Interval........................ 600 seconds Channel Update Contribution.................... SNI. Channel Assignment Leader...................... 00:0b:85:33:3b:60 Last Run....................................... 371 seconds ago Channel Energy Levels Minimum...................................... unknown Average...................................... unknown Maximum...................................... unknown Channel Dwell Times Minimum...................................... 0 days, 00 h 39 m 46 s Average...................................... 0 days, 00 h 39 m 46 s Maximum...................................... 0 days, 00 h 39 m 46 s Radio RF Grouping 802.11b Group Mode............................. AUTO 802.11b Group Update Interval.................. 600 seconds 802.11b Group Leader........................... 00:0b:85:33:3b:60 802.11b Group Member......................... 00:0b:85:33:3b:60 802.11b Last Run............................... 371 seconds ago 　 Mobility Configuration Mobility Protocol Port........................... 16666 Mobility Security Mode........................... Disabled Default Mobility Domain.......................... co172 Mobility Group members configured................ 1 Switches configured in the Mobility Group MAC Address IP Address Group Name 00:0b:85:33:3b:60 10.0.100.21 <local> 　 Interface Configuration Interface Name................................... ap-manager IP Address....................................... 10.0.100.32 IP Netmask....................................... 255.255.255.0 IP Gateway....................................... 10.0.100.1 VLAN............................................. 100 Physical Port.................................... 1 Primary DHCP Server.............................. 10.0.100.1 Secondary DHCP Server............................ Unconfigured ACL.............................................. Unconfigured AP Manager....................................... Yes Interface Name................................... guestwlan IP Address....................................... 10.0.0.2 IP Netmask....................................... 255.255.252.0 IP Gateway....................................... 10.0.0.1 VLAN............................................. 101 Physical Port.................................... 1 Primary DHCP Server.............................. 10.0.0.1 Secondary DHCP Server............................ Unconfigured ACL.............................................. Unconfigured AP Manager....................................... No Interface Name................................... management MAC Address...................................... 00:0b:85:33:3b:60 IP Address....................................... 10.0.100.21 IP Netmask....................................... 255.255.255.0 IP Gateway....................................... 10.0.100.1 VLAN............................................. 100 Physical Port.................................... 1 Primary DHCP Server.............................. 10.0.100.1 Secondary DHCP Server............................ Unconfigured ACL.............................................. Unconfigured AP Manager....................................... No Interface Name................................... service-port MAC Address...................................... 00:0b:85:33:3b:61 IP Address....................................... 0.0.0.0 DHCP Protocol.................................... Enabled AP Manager....................................... No Interface Name................................... virtual IP Address....................................... 1.1.1.1 Virtual DNS Host Name............................ Disabled AP Manager....................................... No 　 WLAN Configuration WLAN Identifier.................................. 1 Network Name (SSID).............................. CO172 Status........................................... Disabled MAC Filtering.................................... Disabled Broadcast SSID................................... Enabled AAA Policy Override.............................. Disabled Number of Active Clients......................... 0 Exclusionlist Timeout............................ 60 seconds Session Timeout.................................. Infinity Interface........................................ management WLAN ACL......................................... unconfigured DHCP Server...................................... Default Quality of Service............................... Silver (best effort) WMM.............................................. Disabled 802.11e.......................................... Disabled Dot11-Phone Mode (7920).......................... Disabled Wired Protocol................................... None IPv6 Support..................................... Disabled Radio Policy..................................... All Security 802.11 Authentication:........................ Open System Static WEP Keys............................... Disabled 802.1X........................................ Enabled Encryption:..................................... 128-bit WEP Wi-Fi Protected Access (WPA1)................. Disabled Wi-Fi Protected Access v2 (WPA2).............. Disabled IP Security................................... Disabled IP Security Passthru.......................... Disabled Web Based Authentication...................... Disabled Web-Passthrough............................... Disabled Auto Anchor................................... Disabled Cranite Passthru.............................. Disabled Fortress Passthru............................. Disabled WLAN Identifier.................................. 2 Network Name (SSID).............................. qi172 Status........................................... Enabled MAC Filtering.................................... Disabled Broadcast SSID................................... Enabled AAA Policy Override.............................. Disabled Number of Active Clients......................... 1 Exclusionlist Timeout............................ 60 seconds Session Timeout.................................. 1800 seconds Interface........................................ guestwlan WLAN ACL......................................... unconfigured DHCP Server...................................... Default Quality of Service............................... Silver (best effort) WMM.............................................. Disabled 802.11e.......................................... Disabled Dot11-Phone Mode (7920).......................... Disabled Wired Protocol................................... None IPv6 Support..................................... Disabled Radio Policy..................................... 802.11G only Security 802.11 Authentication:........................ Open System Static WEP Keys............................... Disabled 802.1X........................................ Enabled Encryption:..................................... None Wi-Fi Protected Access (WPA1)................. Disabled Wi-Fi Protected Access v2 (WPA2).............. Disabled IP Security................................... Disabled IP Security Passthru.......................... Disabled Web Based Authentication...................... Disabled Web-Passthrough............................... Disabled Auto Anchor................................... Disabled Cranite Passthru.............................. Disabled Fortress Passthru............................. Disabled 　 ACL Configuration 　 　 RADIUS Configuration Vendor Id Backward Compatibility................. Disabled Credentials Caching.............................. Disabled Call Station Id Type............................. IP Address Administrative Authentication via RADIUS......... Enabled Aggressive Failover.............................. Enabled Keywrap.......................................... Disabled Authentication Servers Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr --- ---- ---------------- ------ -------- ---- ------- ------------------------------------------------ Accounting Servers Index Type Server Address Port State Tout RFC-3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr ----- ---- ---------------- ------ -------- ---- -------- ------------------------------------------------ 　 　 Route Info Number of Routes................................. 0 Destination Network Genmask Gateway ------------------- ------------------- ------------------- 　 　 Qos Queue Length Info Platinum queue length............................ 100 Gold queue length................................ 75 Silver queue length.............................. 50 Bronze queue length.............................. 25 　 　 Mac Filter Info 　 　 Authorization List 　 　 　 　 Load Balancing Info Aggressive Load Balancing........................ Enabled Aggressive Load Balancing Window................. 0 clients 　 　 Dhcp Scope Info Scope: GuestDHCP Enabled.......................................... No Lease Time....................................... 86400 (1 day ) Pool Start....................................... 10.0.0.100 Pool End......................................... 10.0.3.254 Network.......................................... 10.0.0.0 Netmask.......................................... 255.255.252.0 Default Routers.................................. 10.0.0.1 0.0.0.0 0.0.0.0 DNS Domain....................................... DNS.............................................. 4.2.2.2 0.0.0.0 0.0.0.0 Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0 　 　 Exclusion List ConfigurationUnable to retrieve exclusion-list entry 　 　 　 WPS Configuration Summary Client Exclusion Policy Excessive 802.11-association failures.......... Enabled Excessive 802.11-authentication failures....... Enabled Excessive 802.1x-authentication................ Enabled IP-theft....................................... Enabled Excessive Web authentication failure........... Enabled Trusted AP Policy Mis-configured AP Action....................... Alarm Only Enforced encryption policy................... none Enforced preamble policy..................... none Enforced radio type policy................... none Validate SSID................................ Disabled Alert if Trusted AP is missing................. Disabled Trusted AP timeout............................. 120 Untrusted AP Policy Rogue Location Discovery Protocol.............. Disabled RLDP Action.................................. Alarm Only Rogue APs Rogues AP advertising my SSID................ Alarm Only Detect and report Ad-Hoc Networks............ Enabled Rogue Clients Validate rogue clients against AAA........... Disabled Detect trusted clients on rogue APs.......... Alarm Only Rogue AP timeout............................... 1200 Signature Policy Signature Processing........................... Enabled 　 Spanning Tree Switch Configuration STP Specification...................... IEEE 802.1D STP Base MAC Address................... 00:0B:85:33:3B:60 Spanning Tree Algorithm................ Disable STP Bridge Priority.................... 32768 STP Bridge Max. Age (seconds).......... 20 STP Bridge Hello Time (seconds)........ 2 STP Bridge Forward Delay (seconds)..... 15 　 Spanning Tree Port Configuration STP Port ID................................. 8001 STP Port State.............................. Forwarding STP Port Administrative Mode................ 802.1D STP Port Priority........................... 128 STP Port Path Cost.......................... 4 STP Port Path Cost Mode..................... Auto (Cisco Controller) >If I configure a wireless client with a static IP in VLAN101 and try to ping any valid ip address I get the dreaded Destination Unreachable response.
Any suggestions?
John
John
Current Progress:
Studying:
Studying:
CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)
Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice
Comments
-
SteveO86
Member Posts: 1,423
The Switch port that connect to the AP's should be access ports. Only the the controller should be connected with a dot1q trunk.
By "remote" are these AP's configured as REAP/H-REAP or in Local mode?
If you provide a static address to the WLAN client can they ping the WLC/AP? Then try to ping the switch neighboring the WLC.
Also is the SSID interface configured with the proper VLAN?
From the controller, can you ping the DHCP Device?
With LWAP's, the client traffic goes from:
Client -> RF (SSID) -> AP -> Wired Network (Encapsulated LWAP) -> WLC -> Wired network (Decapsulated) as normal 802.3 traffic.
If you associate and authenticate to the WLAN with a static address, ping the closest point first and reach out. If you can ping the WLC (The IP of the Interface in question) but not the switch connected to the WLC then I would verify the trunk and the SSID configuration.My Networking blog
Latest blog post: Let's review EIGRP Named Mode
Currently Studying: CCNP: Wireless - IUWMS -
hermeszdata
Member Posts: 225
The Switch port that connect to the AP's should be access ports. Only the the controller should be connected with a dot1q trunk.
By "remote" are these AP's configured as REAP/H-REAP or in Local mode?
If you provide a static address to the WLAN client can they ping the WLC/AP? Then try to ping the switch neighboring the WLC.
Also is the SSID configured with the proper VLAN?
With LWAP's, the client traffic goes from:
Client -> RF (SSID) -> AP -> Wired Network (Encapsulated LWAP) -> WLC -> Wired network (Decapsulated) as normal 802.3 traffic.
If you associate and authenticate to the WLAN with a static address, ping the closest point first and reach out. If you can ping the WLC but not the switch connected to the WLC then I would verify the trunk and the SSID configuration.
WCore Switch (APs connected to this) ports are configured as show in the 3560 PoE config. Having more than one VLAN requires the switch ports configured as trunks, not access ports, and configured with a native vlan assigned (in this case the management vlan is vlan100). Additionally, all VLANs are in each switch's database.
APs are configured as Local. and SSID(s) are configured correctly. (NOTE: I had the same issue with a single SSID and the switch ports set as access on VLAN 100.
Clients associate/connect to APs. Authentication is open with no encryption (unsecure network). Statically configured clients are unable to ping anything nor are they pingable from the WLC or any device. The WLC GUI shows clients connected to AP(s).
I pulled my 1121 AP from my local network aftrer setting it up for DHCP and plugged it into the 3560 switch (initially the port set for VLAN100 and then VLAN101) in both cases the AP pulled an IP address and when the client connected it to pulled an IP address via DHCP and was able to connect completely to the network/internet.
This confirms the router and switch setups and points directly to an issue with the WLC config.JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
SteveO86
Member Posts: 1,423
hermeszdata wrote: »WCore Switch (APs connected to this) ports are configured as show in the 3560 PoE config. Having more than one VLAN requires the switch ports configured as trunks, not access ports, and configured with a native vlan assigned (in this case the management vlan is vlan100). Additionally, all VLANs are in each switch's database.
Wireless LAN Controller and Lightweight Access Point Basic Configuration Example - Cisco SystemsWhile the Cisco WLCs always connect to 802.1Q trunks, Cisco lightweight APs do not understand VLAN tagging and should only be connected to the access ports of the neighbor switch.hermeszdata wrote: »Clients associate/connect to APs. Authentication is open with no encryption (unsecure network). Statically configured clients are unable to ping anything nor are they pingable from the WLC or any device. The WLC GUI shows clients connected to AP(s).
Pretty odd.. The client can't ping the IP of the dynamic interface the SSID is configured for.. Any useful logs on the WLC? Maybe create a temporary pool on the WLC. And the WLC can ping the sub-interface (of the guest network) on router.hermeszdata wrote: »I pulled my 1121 AP from my local network aftrer setting it up for DHCP and plugged it into the 3560 switch (initially the port set for VLAN100 and then VLAN101) in both cases the AP pulled an IP address and when the client connected it to pulled an IP address via DHCP and was able to connect completely to the network/internet. This confirms the router and switch setups and points directly to an issue with the WLC config.
Agreed the DHCP setup from the router to the switches/VLAN look correct.My Networking blog
Latest blog post: Let's review EIGRP Named Mode
Currently Studying: CCNP: Wireless - IUWMS -
hermeszdata
Member Posts: 225
Issues resolved ... at last.Wireless LAN Controller and Lightweight Access Point Basic Configuration Example - Cisco Systems
Pretty odd.. The client can't ping the IP of the dynamic interface the SSID is configured for.. Any useful logs on the WLC? Maybe create a temporary pool on the WLC. And the WLC has full connectivity to the rest of the network?
Agreed the DHCP setup from the router to the switches/VLAN look correct.
It's all those undefined buttons and switches. So, I just began experimenting a bit.
Under the WLANs tab in the WLC's GUI is a Security Policy area. When I switched Layer 2 Security to none (default is 802.1X) clients began grabbing IPs right away and proper access to networks gained.
Playing with the encryption settings now.
RE: Switch port settings. The text you quoted is accurate ... However ...
when we define the port's config as follows:! interface FastEthernet0/3 switchport trunk encapsulation dot1q [COLOR=darkred]switchport trunk native vlan 100[/COLOR] switchport trunk allowed vlan 1,10,11,100,101 switchport mode trunk spanning-tree portfast !
the port become's an access (untagged) port for the specified native vlan. This is the same process used for data/voice trunking in VoIP configurations.
Using VLANs with Cisco Aironet Wireless Equipment - Cisco Systems
The above document (I've actually had this printed for a couple of months) is a great reference for VLAN trunking on APs and clearly references the aspect/importance of the native vlan, both from the AP's and Switch's perspective.
I just wish that there was better documentation on the rest of the WLC configuration. Now on to figuring out ACLs and the rest of the security configuration.
Thanks.
JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
SteveO86
Member Posts: 1,423
As far as the port configuration, that document is for Autonomous AP's not LWAPs, but hey if it works it works. Since the native vlan isn't tag your right you'll be ok.
Layer 2 security settings, that means the client would associate to the AP but will not pass traffic until authenticated.
(When in doubt I've found it helpful to SSH into the AP and debug the client, that probably would have helped with situation quicker, I just didn't think about the SSID security settings, and of course it's right their in the config
) My Networking blog
Latest blog post: Let's review EIGRP Named Mode
Currently Studying: CCNP: Wireless - IUWMS -
hermeszdata
Member Posts: 225
As far as the port configuration, that document is for Autonomous AP's not LWAPs, but hey if it works it works. Since the native vlan isn't tag your right you'll be ok.
Layer 2 security settings, that means the client would associate to the AP but will not pass traffic until authenticated.
(When in doubt I've found it helpful to SSH into the AP and debug the client, that probably would have helped with situation quicker, I just didn't think about the SSID security settings, and of course it's right their in the config )
Tried the SSH thing but I apparently have other things to configure to allow that connectivity.
That was a lot to look at config wise.
I'm still trying to make sense of it all. Back to the books. JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
hermeszdata
Member Posts: 225
This doc addresses the LAP/native vlan issue.
Guest WLAN and Internal WLAN using WLCs Configuration Example - Cisco Systems
JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
SteveO86
Member Posts: 1,423
Here's the Cisco Config guide for the IOS/Model, not sure if you got this already. (it's seem that model is EoL, now wonder that was tough to find, or I would have posted it earlier)
Cisco Wireless LAN Controller Configuration Guide, Release 3.2 - Chapter 1 - Overview [Cisco 4400 Series Wireless LAN Controllers] - Cisco Systems
As far as the SSH thing, it should be a configurable option under the individual AP's.
Just wait till you get more AP's on their, the config grows.
Good luck!
(I don't how v3.2.2 is but I know earlier versions of v5 and v6 were exceptionally buggy for me, and some of the bugs required me to reboot the AP to recover from. We are up v7 as far as controller code goes so if some of the documentation on Cisco's site don't match that would be why)My Networking blog
Latest blog post: Let's review EIGRP Named Mode
Currently Studying: CCNP: Wireless - IUWMS -
hermeszdata
Member Posts: 225
Here's the Cisco Config guide for the IOS/Model, not sure if you got this already. (it's seem that model is EoL, now wonder that was tough to find, or I would have posted it earlier)
Cisco Wireless LAN Controller Configuration Guide, Release 3.2 - Chapter 1 - Overview [Cisco 4400 Series Wireless LAN Controllers] - Cisco Systems
As far as the SSH thing, it should be a configurable option under the individual AP's.
Just wait till you get more AP's on their, the config grows.
Good luck!
(I don't how v3.2.2 is but I know earlier versions of v5 and v6 were exceptionally buggy for me, and some of the bugs required me to reboot the AP to recover from. We are up v7 as far as controller code goes so if some of the documentation on Cisco's site don't match that would be why)
The 4136 I have has 3.2.210.0. I currently have 20 of the AIR-AP1010s. looking to get an upgrade on the IOS for the 4136 and the APs.
I have to start (tomorrow) on resetting what I have in APs and get them ready for installation/migration. I also need to work on the authentication process for the Quest access and how to use a URL to do this.JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
SteveO86
Member Posts: 1,423
Yea when you after you get the upgrade on the WLC and reboot the WLC (so it boots to the new version) all the LWAPs will be down until the the LWAPs download the new code.
I think older version only allowed 4-6 LWAP's to download the update at once, the rest will continuously reboot, until a slot is open. So you definitely want to upgrade prior to putting everything in production. I think the latest code for the 4136 is 3.2.215.. I think not a 100% on that one.My Networking blog
Latest blog post: Let's review EIGRP Named Mode
Currently Studying: CCNP: Wireless - IUWMS
