GNS3 TSHOOT Project .zip file with the entire base configuration

I finish completing the Tshoot topology on GNS3 and I post a Zip file on my blog with the .net file and all the config files. The entire lab should work, every device should ping. If any of you guys have any problem let me know that I would try my best to fix it. So now we have a working Lab, so let broke the lab and start troubleshooting. I would be posting a brooking config in couple of day, but before that I would like people to test the lab and see if everything is working fine and if there is any technology that anybody wants to add to the lab. My website is gomezd.com Thanks

Find more posts tagged with

Comments

mzbagasra

Excellent, I will test this once get a chances. Any tips for Route Exam???? Thanks again.

amb1s1

mzbagasra wrote: »

Excellent, I will test this once get a chances. Any tips for Route Exam???? Thanks again.

I don't I can't give you any tips since I took the BCSI test 3 years ago and the test blue print aren't the same, but I can tell you something that worked for me is Lab, lab and lab.

Chris_

Good job, I'll download it later and give it a try.

amb1s1

Well the firts troubleshoot begin. In the zip that I post on the website, there is an small problem. Client 1 and Client were able to grab an IP address from the DHCP server. Now the Client is able to ping both DSW1 and DSW2 vlan 10 ip , but not able to ping the Virtual IP for HSRP. Let see who get the result first.

JaCkNiFe

This is a really great idea, I wish I could take a look! I won't be able to get into my lab until Saturday.

amb1s1

I was able to find the problem, but I won't tell. the first one to tell me what is the problem in an hour counting from now, I would gift the person the issh iPhone or iPad app. is not much, but it is something.

DPG

I thought I saw a problem with HSRP on DSW2.

interface Vlan10
 ip address 10.2.1.2 255.255.255.0
[B] standby preempt[/B]
 standby 1 ip 10.2.1.254

I was unable to ping 10.2.1.254 from Client 1 the first few times that I loaded the topology. GNS3 crashed a few times and now, for some reason, I can ping the HSRP virtual IP without issue.

Chris_

Anyone else had problems with idle Pc on this, doesn't matter how many times I set the value, my proc is ramped at 100%. I've run bigger labs than this before okay.
The only other thing is, shouldn't the wan routers be on frame relay?

amb1s1

Yes, there is a problem with pinging the virtual ip. I know the fix, but if you want the answer pm me. It is very easy fix, bur it took me sometime to figure out.

amb1s1

You can ping, but the issue is not fix. Try to ping other vlan, and you would see that is still broke. There is a reason why sometime you can ping and other time no.

creamy_stew

Is this a problem with this actual file, or with Dynamips/GNS3 in general?

Anyway, thanks to the OP!

amb1s1

After I fix the problem, the lab is been working fine.

DPG

Is this the issue?

DSW1 is auto summarizing networks in EIGRP 10.

amb1s1

No, I'm giving you guys a hint: the problem is with ASW1 and ASW2.

flipmad

I have the appropriate IOS but when I open the GNS3 file I get an error on the ghost file. it is not allowing me to redirect to the valid IOS I have on my computer.

amb1s1

flipmad wrote: »

I have the appropriate IOS but when I open the GNS3 file I get an error on the ghost file. it is not allowing me to redirect to the valid IOS I have on my computer.

try to use the same IOS version that the lab is using. It happen to me when I use other version, but same model the lab doesn't work.

baswarajnila

link to your blog doesnt work. pls help to get .zip file

Mothithi

I am preparing to write TSHOOT exam and just found Cisco Packet tracer for my Training and I have been using GNS3 as well, is there a recommendation for Cisco packet Tracer to continue with it?

RouteMyPacket

Mothithi wrote: »

I am preparing to write TSHOOT exam and just found Cisco Packet tracer for my Training and I have been using GNS3 as well, is there a recommendation for Cisco packet Tracer to continue with it?

GNS3 for TSHOOT, Packet Tracer is not going to cut it