Options

1st and Last Subnet ?

drew5766drew5766 Member Posts: 3 ■□□□□□□□□□
in CCNA & CCENT
I did some research, not a whole lot, primarly because I wanted it approved by this community.

The 1st and Last Subnets are dropped according to Cisco standards ?

When taking test if Im asked to assign e0 to 1st useable IP of first subnet do I assume the first subnet is void and move to the next ?

IE: First IP 198.25.36.0/27?

198.25.36.33 ?

Thanks for the Help
· Share on FacebookShare on Twitter

Comments

  • Options
    kplabkplab Member Posts: 101
    Traditionally, zero-subnet and all-ones-subnet were reserved. However, Cisco routers can be configured to override that using the command "ip subnet-zero". This command is enabled by default since IOS version 12.0. It means that you can use the two subnets by default for IOS v12.0 or above.
    KPLAB
    www.kp-lab.com - Free CCNA, CCNP, and Network+ Study Guides
    · Share on FacebookShare on Twitter
  • Options
    DrakonblaydeDrakonblayde Member Posts: 542
    But, for the purposes of the CCNA exam, the first and last subnet are not available unless the questions states otherwise
    = Marcus Drakonblayde
    ================
    CCNP-O-Meter:
    =[0%]==[25%]==[50%]==[75%]==[100%]
    ==[X]===[X]====[ ]=====[ ]====[ ]==
    =CCNA==BSCI==BCMSN==BCRAN==CIT=
    · Share on FacebookShare on Twitter
Sign In or Register to comment.