1841 config issue
MAC_Addy
Member Posts: 1,740 ■■■■□□□□□□
in CCNA & CCENT
Hi,
I have an 1841 router that's having some issues. I recently reset everything on the router, but for some reason every time I boot it up, configure everything and reboot, it'll clear everything I had done and start from scratch.
Before I reboot it I make sure that I have done a copy run start command.
I have an 1841 router that's having some issues. I recently reset everything on the router, but for some reason every time I boot it up, configure everything and reboot, it'll clear everything I had done and start from scratch.
Before I reboot it I make sure that I have done a copy run start command.
2017 Certification Goals:
CCNP R/S
CCNP R/S
Comments
-
QHalo
Member Posts: 1,488
What's the configuration register set to? My guess is it might be set to ignore NVRAM on restart.
http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_creg.html
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a65a5.shtml