Options
Frame Relay
dead_p00l
Member Posts: 136
in CCNA & CCENT
How much and how in depth is the frame relay portion of the CCNA now? Is it worth spending countless hours of lab time or can you pick up enough from the texts? Thanks.
This is our world now... the world of the electron and the switch, the
beauty of the baud.
beauty of the baud.
Comments
-
Options
andy4tech
Member Posts: 138
Go and check on Cisco website,you will see what you are require to know about frame relay -
Options
Mierdin
Member Posts: 79 ■■□□□□□□□□
I personally spent a decent amount of time on WAN in general. Some say it's one of the harder portions of the test, next to the infamous NAT/ACL portion."We gain complexity by linking together. To be isolated within a single platform is to be reduced. We see less. Understand less. It is quieter.” -Legion
Current Focus: CCIE R/S
Blog -- Keeping It Classless -
Optionscertnerd
Registered Users Posts: 9 ■□□□□□□□□□
There is quite a lot.
You need to understand the different topolgies i.e NBMA and Point to point / point to multi point. Understand why they are there and what effect this as with regards to IP addressing, routing and the layer 3 to layer 2 mapping and encapsulation process. Knowing silly stuff like 2 frame types and 3 lmi types comes up too. Oh BECN,FECN and DE bits!