Testing - L2VPN

chongch01

Understand that L2VPN will not working in Olive.
Can I simulate it in a M-Series router with logical routers?

Thanks

Find more posts tagged with

SAVE $250 on Your Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View Boot Camps

Comments

Aldur

Yes, you can use M series with logical routers to simulate a large router topology with L2 vpns.

chongch01

Thanks Aldur

chongch01

Aldur wrote: »

Yes, you can use M series with logical routers to simulate a large router topology with L2 vpns.

Hi Aldur,

To build a lab for JNCIE-SP, may I know how many equipment we need at the lowest cost?

Example :
1 x MX5
4 x J series
1 x EX switch

Thanks

Aldur

Cheapest route - getting a rack of SRX100s, or renting some JunoSphere time.

If you look at the objects for the JNCIE-SP exam the branch SRX line can do everything that is needed.

chongch01

Thanks Aldur

chongch01

Hi,

Any limitation for JNCIE-SP by using SRX? I might request company to build a lab for testing
Thanks

Aldur

The branch SRX devices (srx100, srx210, srx240, etc.. ) can do everything that the JNCIE-SP exam objectives list. So you should be more than good to use SRX devices to practice for the JNCIE-SP exam.

chongch01

Thanks Adur. SRX100B (512MB RAM) sufficient? Hopefully my company has the budget next year.
Just got a Juniper project & hopefully a good start to learn Juniper SP technologies in-dept.

Aldur

Yip, an SRX100B would be sufficient to use in a practice JNCIE-SP topology. However, I'd recommend picking up it least a few SRX100H if you can. That way you'd be covered to do the JNCIE-SEC too.

compcert

How about Route Reflector?
I saw the SRX spec and saw RR is not supported on the affordable model