Setting up a terminal server

hasitha257

Group, I know this might have been asked a million times or even zillion times. I have searched extensively but I still feel I am missing something. Here's my situation:

I am trying to connect a new box "A" to the terminal server ( C2610xm) , I verified there is a cable connected between the terminal server and my box "A". However I am unable to determine which line on the terminal server my box "A" is connected. Can anyone help me out? I really appreciate any feedback.

MrBrian

What kind of access server are you using? If you've got a 2511 or 2509 then these videos should prove helpful.

This video from Chris Bryant helped me set up my access server...

CCNA / CCNP Home Lab: Access Server Configuration And Troubleshooting - YouTube

And a nice video from another source...

Configuring a Cisco Access Server 2509 - 2511 PART 1 - YouTube

kryolla

terminal-server#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 0 0 0/0 -
1 TTY 9600/9600 - - - - - 0 5 0/0 -
2 TTY 9600/9600 - - - - - 0 0 0/0 -
3 TTY 9600/9600 - - - - - 0 25 0/0 -
4 TTY 9600/9600 - - - - - 0 91 0/0 -
5 TTY 9600/9600 - - - - - 0 184 0/0 -
6 TTY 9600/9600 - - - - - 0 1247 0/0 -
7 TTY 9600/9600 - - - - - 0 5 0/0 -
8 TTY 9600/9600 - - - - - 0 10 0/0 -
9 AUX 9600/9600 - - - - - 0 4 0/0 -
* 10 VTY - - - - - 1 0 0/0 -
11 VTY - - - - - 0 0 0/0 -
12 VTY - - - - - 0 0 0/0 -
13 VTY - - - - - 0 0 0/0 -
14 VTY - - - - - 0 0 0/0 -

terminal-server#sh host
Default domain is not set
Name/address lookup uses static mappings

Host Port Flags Age Type Address(es)
s2 2009 (perm, OK) 10 IP 1.1.1.1
r6 2006 (perm, OK) 10 IP 1.1.1.1
r4 2004 (perm, OK) 10 IP 1.1.1.1
r2 2002 (perm, OK) 10 IP 1.1.1.1
r1 2001 (perm, OK) 10 IP 1.1.1.1
s1 2008 (perm, OK) 10 IP 1.1.1.1
s4 2007 (perm, OK) 10 IP 1.1.1.1
r5 2003 (perm, OK) 10 IP 1.1.1.1
r3 2005 (perm, OK) 10 IP 1.1.1.1
terminal-server#