nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Is this switch good for CCNA lab?

johnifanx98

Buy.com - Cisco SR224 24-Port 10/100 Unmanaged Switch, Refurbished

I just came across it this morning...

BTW, any criteria for choosing a switch for CCNA lab?

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

cyberguypr

Short answer is NO. An unmanaged switch is nothing but a glorified hub. It doesn't run IOS. There's nothing to configure.

Have you gone through the links ALXX posted on your other thread? Those have a lot of information that will clear most of the questions you may have. To sum up, your safest bet is a couple of 2950 switches. If you do your homework and don't rush you can find them on eBay anywhere from 30-60 bucks a piece. Also, have you searched here for "CCNA LAB"? There's a good number of lab setups, what works and what doesn't, sources for labs, etc.

KrisA

cyberguypr wrote: »

Have you gone through the links ALXX posted on your other thread?

That was a timely and great read IMO. Yes it took a long time, Wendell is very winded, but a MUCH deeper understanding. I would HIGHLY recommend reading the blog.