Cisco 2511 - Bootstrap Error

TheFoX21

Hey all,

This is my first time posting here, but if someone may have an answer to this I'd be greatly appreciative. I currently have a Cisco 2511 Access server as part of my CCNA lab. I recently booted it up for the first time since I got it and the first time it worked fine and I was able to start configuring it. Since then I've gone on to configure a few other routers and now when I come back to the 2511 it for some reason won't even bring me to the user exec. Below is a snapshot of the output when it currently boots. I know the CONFIG_NEWER error is just referring to the miniIOS in flash since it is version 11.0 instead of 11.2 if I ever downgraded my code some of the commands might not be understood. As far as I can tell though it boots up fine. There was no difference when I booted it up with or without connections to it. Whatever the case it won't bring me to any exec prompt to be able to input any commands. I do have a saved copy of the config that is currently running if it is needed. Anyone have any thoughts?

System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 14336 Kbytes of main memory

%SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be correctly understood.
F3: 4171344+55688+235808 at 0x3000060

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 11.2(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 22-Sep-97 21:23 by ckralik
Image text-base: 0x030228E8, data-base: 0x00001000

cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 08393732, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

[This is as far as it gets. It never comes to the Press Return to get started!]