CISCO 2950 Great Deal

in CCNA & CCENT
I just found a switch with this Show run:
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 23-Mar-05 15:33 by yenanh
Image text-base: 0x80010000, data-base: 0x80562000
ROM: Bootstrap program is C2950 boot loader
Switch uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-22.EA4.bin"
cisco WS-C2950-24 (RC32300) processor (revision R0) with 21039K bytes of memory.
Processor board ID FCZ1227405T
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:21:D7:C0:63:80
Motherboard assembly number: 73-5781-14
Power supply part number: 34-0965-01
Motherboard serial number: FOC1223269G
Power supply serial number: DTH1215232H
Model revision number: R0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FCZ1227405T
Configuration register is 0xF
It is perfect for CCNA?Please answer fast!!!
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 23-Mar-05 15:33 by yenanh
Image text-base: 0x80010000, data-base: 0x80562000
ROM: Bootstrap program is C2950 boot loader
Switch uptime is 2 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-22.EA4.bin"
cisco WS-C2950-24 (RC32300) processor (revision R0) with 21039K bytes of memory.
Processor board ID FCZ1227405T
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:21:D7:C0:63:80
Motherboard assembly number: 73-5781-14
Power supply part number: 34-0965-01
Motherboard serial number: FOC1223269G
Power supply serial number: DTH1215232H
Model revision number: R0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FCZ1227405T
Configuration register is 0xF
It is perfect for CCNA?Please answer fast!!!
Comments
-
cisco_trooper Member Posts: 1,441 ■■■■□□□□□□
24 port 2950 SI. It might be suitable for the CCNA, but if you are going to go further than that I would hold out for the 2950 EI model so you can get some decent QoS study going. -
alxx Member Posts: 755
as long as its not expensive. should be somewhere between $25 and $40 + p&hGoals CCNA by dec 2013, CCNP by end of 2014 -
MAC_Addy Member Posts: 1,740 ■■■■□□□□□□
as long as its not expensive. should be somewhere between $25 and $40 + p&h2017 Certification Goals:
CCNP R/S -
universalfrost Member Posts: 247
yeah good for ccna if you pay $50ish including shipping.
you can hold out for a 3550 SMI (can upgrade to emi ) for 60 ish plus shipping. I averaged about $70 for both of mine shipped."Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green