Options
Root Port Election process.
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
in CCNA & CCENT
Im going through the book a second time with a fine-toothed brush and restudying - so stupid questions may appear.
I understand there's a Root switch elected through the first STP process with the Bridge ID (Priority and MAC address). After this process is completed and the Root Switch is selected, the Root Switch is the only switch that can create BDPUs.
With that in mind, the Root Port selection is really a broadcast storm of Hello BDPUs (from the Root Switch) that add to the "Cost to reach root" field.
Am I correct in thinking that the Root port sends the BDPUs?
I understand there's a Root switch elected through the first STP process with the Bridge ID (Priority and MAC address). After this process is completed and the Root Switch is selected, the Root Switch is the only switch that can create BDPUs.
With that in mind, the Root Port selection is really a broadcast storm of Hello BDPUs (from the Root Switch) that add to the "Cost to reach root" field.
Am I correct in thinking that the Root port sends the BDPUs?
In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams
Comments
-
Options
tone-def
Registered Users Posts: 1 ■□□□□□□□□□
My understanding of this :
802.1d BPDU's are originated from the root bridge and passed along.
802.1w all switches send bpdu's every 2 second if in a forwarding state.
Blocked ports only listen for bpdu's and don't send.
You can also test this in a lab with the show spanning tree detail. it should show the sent and received bpdu's.