WS-C2960G-24TC-L 12.2 multiple SVI support
As I understand, Cisco WS-C2960G-24TC-L switches support multiple SVI's starting from IOS 12.2. Is this true? How is the multiple SVI support feature called in official documentation(for example in Cisco Feature Navigator)?
Comments
-
fluk3d
Member Posts: 141 ■■■□□□□□□□
I haven't gone through all this but maybe in here
Release Notes for the Catalyst 3750, 3560, and 2960 Switches, Cisco IOS Release 12.2(50)SE and Later - Cisco Systems"Imagination is more important than knowledge." - Albert Einstein -
m4rtin
Member Posts: 170
I haven't gone through all this but maybe in here
Release Notes for the Catalyst 3750, 3560, and 2960 Switches, Cisco IOS Release 12.2(50)SE and Later - Cisco Systems
Closest feature I found was "Layer-3 interfaces", but at least this isn't listed in Cisco Feature Navigator. I checked the Release Notes for the Catalyst 2960 Switches, Cisco IOS Release 12.2(25)FX as well, but did not find anything pointing to layer-3 interfaces. In addition, it would be good to know if 2960 allows multiple IP addresses configured to single SVI? -
Nate--IRL--
Member Posts: 103 ■■□□□□□□□□
Aren't SVI's a Layer 3 feature? AFAIK the 2960 is layer 2 only.
Nate -
ColbyG
Member Posts: 1,264
Nate--IRL-- wrote: »Aren't SVI's a Layer 3 feature? AFAIK the 2960 is layer 2 only.
Nate
2960s are limited L3. They can do some routing.