Command 'Ctrl-Shift-6, x ' not working properly in MAC os

gprasadb

Hi,

I am trying to shift (reverse telnet) to terminal server from router R1, R2 etc but the command does not work properly. i need to press continuously to gain the terminal server access. Please let me know if you have come across the same issue and the solution for it.

Many Thanks
GP

inscom.brigade

maybe this might help some

www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml


for some reason when I check the link link above I get redirected. Do you also get redircted to a generic cisco home page, or is their a access server config page.
I try to fix it many times.

http://cisconet.com/vendor/cisco/215-cisco-access-server-setup-for-the-labccie.html

gprasadb

opps..i was pressing 'x' key by holding ctrl+shift+6 keys.

Got to know about not to hold ctrl+shift+6 keys before pressing 'x' key.

scopemc@msn.com

I know this is a really old thread, but found it while trying to resolve the same issue. My resolution was under preferences, keyboard, Input sources. I had ABC, US and US International. I deleted everything, but US and the combination worked as it should.

Hope it helps someone!