2621XM boot problems

Dustyk

Guys I am trying to boot one of my 2621XMs that my office gave me to use. This is what happens at startup and Im not sure what is wrong. If its ram or flash related or if its just old and tired where I need to replace it.
Anyone have any ideas.

System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory


program load complete, entry point: 0x80008000, size: 0x16b0ce4
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################################################### [OK]


Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
00036D 0X00103980 C2621XM Dual Fast Ethernet
000065 0X00031500 Four port Voice PM
0X00098670 public buffer pools
0X00211000 public particle pools
TOTAL: 0X003DE4F0


If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 3Mb.
Using 3 percent iomem. [3Mb/128Mb]


Restricted Rights Legend


Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.


cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706






Cisco IOS Software, C2600 Software (C2600-IPVOICEK9-M), Version 12.4(3g), RELEASE SOFTWARE (fc2)
Technical Support: Support and Documentation - Cisco Systems
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 06-Nov-06 01:52 by alnguyen
Image text-base: 0x80008098, data-base: 0x820CBB54






00:00:12 UTC Fri Mar 1 2002: Unexpected exception to CPUvector 100, PC = 0x80257CEC, LR = 0x80269F88


-Traceback= 0x80257CEC 0x80269F88 0x80269444 0x80268C24 0x80959244 0x80265EEC 0x8026605C 0x81C5A444 0x80E95F60 0x80E96230 0x80949BD8 0x8094D06C


CPU Register Context:
MSR = 0x00009032 CR = 0x53000035 CTR = 0x80269F3C XER = 0xA000006F
R0 = 0x400810EE R1 = 0x83EB6AC0 R2 = 0x83A20000 R3 = 0x00000003
R4 = 0x00000004 R5 = 0x00000000 R6 = 0x83A20000 R7 = 0x68010000
R8 = 0x00000003 R9 = 0xFFFFFFFF R10 = 0x68010000 R11 = 0x83A40000
R12 = 0x33000035 R13 = 0xFFF4B518 R14 = 0x80E961EC R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x83EB6AF0 R27 = 0x00000000
R28 = 0x68000000 R29 = 0x68004000 R30 = 0x00000004 R31 = 0x00000000


Writing crashinfo to flash:crashinfo_20020301-000012


=== Flushing messages (00:00:12 UTC Fri Mar 1 2002) ===


Queued messages:
*Mar 1 00:00:12.155: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.


*Mar 1 00:00:06.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*** System received a SegV exception ***
signal= 0xb, code= 0x100, context= 0x83c8f808
PC = 0x80257cec, Vector = 0x100, SP = 0x83eb6ac0

Dustyk

I guess no one has any idea...

networker050184

What have you tried so far?

Dustyk

I got it to work today. I replaced the Ram and Flash. I uploaded a new IOS. When reset it would still loop when trying to boot with the above error. Finally I tried boot from flash with iso name and it worked. I dont know what the difference was or if it will continue to work. I rebooted it a few times to make sure and it always booted. This was of course after the first time when I issued a copy run start.

mohamedshajid

Make sure when you changing the RAM or What ever sometimes it would not supported my current IOS, well did you update or else did you have any back-up IOS and configurations. There is one troubleshoot use keep the current IOS Backup,and Install the RAM on to it. Now Do not update and try to restore the current old backup IOS. Maybe it would be fixed i also encountered a problem and i just fixed by myself.