EVPL Configuration on Router
I have 3 field sites connected via EVPL to a one single site say HUB. Each field sites is 10 Mb evpl with 10 Mb EVC. The destinale site where all 3 sites come is 100 Mb EVPL with 30 Mb EVC.
How should I configure Cisco 1941 series field routers and the Cisco 2921 router at main Hub site.
How should I configure Cisco 1941 series field routers and the Cisco 2921 router at main Hub site.
Comments
-
networker050184
Mod Posts: 11,962 Mod
Why don't you show us what you are thinking and we can point you in the right direction?An expert is a man who has made all the mistakes which can be made. -
networker050184
Mod Posts: 11,962 Mod
Show us the configuration you have in mind and we can help.An expert is a man who has made all the mistakes which can be made.
-
rabcdabcd
Registered Users Posts: 3 ■□□□□□□□□□
I am really new and struggling for considering of hardware to use between 2 sites in next month for 1st EVPL circuit. I have 2 Cisco IE3010 series switch with L3 (Layer3) IOS image running.
Switch A (IE30110) : Port FE0/1 connects to other end Switch B (IE3010) port FE0/1
I have 10 Mb EVC between the sites.
On Sw A here is what I can start with:
Switch A:
conf t
ip add 10.10.10.1 255.255.255.252
no shut
end
Switch B:
conf t
ip add 10.10.10.2 255.255.255.252
no shut
end
What else will I need to make the connection work through EVPL circuit? I am beking said that it is Layer2 connection.