VTP not updating clients???

Donnelly82Donnelly82 Posts: 38Member ■■■□□□□□□□
Hi guys and girls. Ive been doing more labs, and now at the VTP stage. Im stuck. spent a few hours trying to figure out why the VTP isn't updating clients, and my mind is now moosh. I even erased the 3 switches and started from scratch just incase there was some sneaky wee thing that was wrong. Heres my VTP Stats. the servers revision is the lowest and not to sure why??

Switch_3550#sho vtp stat
VTP Version : running VTP2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 6
VTP Operating Mode : Server
VTP Domain Name : HOMELAB
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0x0D 0x09 0xD1 0x9F 0xB8 0x7C 0xFF 0x6F
Configuration last modified by 192.168.10.240 at 3-1-93 00:06:51
Local updater ID is 192.168.10.240 on interface Vl1 (lowest numbered VLAN interface found)


Switch_2950(1)#sho vtp stat
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 64
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : UTC_TR
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0x03 0x82 0xDD 0x82 0xC0 0xB6 0xDA 0x14
Configuration last modified by 192.168.10.240 at 3-1-93 00:13:53



Switch_2950(2)#sho vtp status

00:51:56: %SYS-5-CONFIG_I: Configured from console by console
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 64
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : UTC_TR
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0x03 0x82 0xDD 0x82 0xC0 0xB6 0xDA 0x14
Configuration last modified by 192.168.10.240 at 3-1-93 00:13:53

Comments

Sign In or Register to comment.