Safe mode

p9p9 Member Posts: 2 ■□□□□□□□□□
in A+
Is modem and FDD drivers are loaded during safe mode or not?
Please help
· Share on FacebookShare on Twitter

Comments

  • JITJIT Member Posts: 32 ■■□□□□□□□□
    Rather than a direct answer, start your computer in Safe Mode. Go to device manager, and check whether Modem/FDD are loaded.
    · Share on FacebookShare on Twitter
  • lazyartlazyart Member Posts: 483
    Or, access the floppy and connect to your ISP. Once you do it for yourself, you're likely not to forget.

    Yes, we could answer, but you will certainly learn better from experience.
    I'm not a complete idiot... some parts are missing.
    · Share on FacebookShare on Twitter
  • DrakonblaydeDrakonblayde Member Posts: 542
    Well, I will say that accessing your ISP from safe mode won't work, as the network drivers aren't loaded. But as for whether or not the COM ports are useable under safe mode, install HyperTerm, boot to safe mode, set HyperTerm to talk directly to the COM port and start issuing AT commands. That'll tell you right away whether the COM routines are loading.

    As to whether or not the Floppy drive is accessible, that's as simple as booting into safe mode and opening up My Computer. If the floppy drive is listed, then the routines are loaded.
    = Marcus Drakonblayde
    ================
    CCNP-O-Meter:
    =[0%]==[25%]==[50%]==[75%]==[100%]
    ==[X]===[X]====[ ]=====[ ]====[ ]==
    =CCNA==BSCI==BCMSN==BCRAN==CIT=
    · Share on FacebookShare on Twitter
Sign In or Register to comment.