Options
GNS3 setup
ch1vas
Member Posts: 81 ■■□□□□□□□□
Hey all,
I'm setting up a CCNA Security lab with GNS3. What firmware for Firewalls and Routers would you recommend?
Also, can I use CCP in combination with GNS3?
Any other GNS3 advice related to CCNA security is very welcome.
Thank you,
I'm setting up a CCNA Security lab with GNS3. What firmware for Firewalls and Routers would you recommend?
Also, can I use CCP in combination with GNS3?
Any other GNS3 advice related to CCNA security is very welcome.
Thank you,
Goal 2013: CCENT (x); CCNA(x); Security+(x); ITIL Foundation ( )
Comments
-
Optionsch1vas
Member Posts: 81 ■■□□□□□□□□
Anyone?Goal 2013: CCENT (x); CCNA(x); Security+(x); ITIL Foundation ( )
-
Options
Zartanasaurus
Member Posts: 2,008 ■■■■■■■■■□
If I were to guess, 8.3+ for ASA and 12.4T for routers.
Also, the Cisco Press site seems to verify that you need 8.3, 8.4 for ASA.
About CCNA Security > Customers and Markets
I don't see any reason you couldn't use CCP with GNS3.Currently reading:
IPSec VPN Design 44%
Mastering VMWare vSphere 5 42.8% -
Options
Master Of Puppets
Member Posts: 1,210
Go 8.4 or higher and you're fine.Yes, I am a criminal. My crime is that of curiosity. My crime is that of judging people by what they say and think, not what they look like. My crime is that of outsmarting you, something that you will never forgive me for. -
OptionsDANMOH009
Member Posts: 241
CCP works with GNS3 fine,
I didnt find it the easiest thing to set up, in fact my goal for today was to test GNS3 with CCP and after 2 and half hours i finally got it working the way i wanted.
If you run into any troubles in set up give us a shout or post on here, im sure me or the others will be able to help.
In terms of IOS if your using GNS3 i could really only get hold of c1700 IOSes (ver12.3(10))
im sure the others are fine (had trouble with 2600s), i personally just couldnt get hold of many.
Bets of luck.