VTP version 1 and 2

workfrom925

From Cisco NetAcademy material: Ensure that all switches are configured to use the same VTP protocol version. VTP version 1 is not compatible with VTP version 2.

But I see it on my home lab that VTP version 1 can talk to version 2. As show below. So does VTP version 1 and version 2 talk to each other?

===

S3#show vtp sta
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 9
Maximum VLANs supported locally : 1005
Number of existing VLANs : 12
VTP Operating Mode : Server
VTP Domain Name : sssss
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x3A 0x8A 0x93 0x84 0xD2 0xB1 0xDE 0xC1
Configuration last modified by 0.0.0.0 at 3-1-93 00:08:08
Local updater ID is 0.0.0.0 (no valid interface found)
S3#
S2>
S2>ena
S2#show vtp sta
VTP Version : 2
Configuration Revision : 9
Maximum VLANs supported locally : 128
Number of existing VLANs : 12
VTP Operating Mode : Server
VTP Domain Name : sssss
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x3A 0x8A 0x93 0x84 0xD2 0xB1 0xDE 0xC1
Configuration last modified by 0.0.0.0 at 3-1-93 00:08:08
Local updater ID is 0.0.0.0 (no valid interface found)
S2#

iamme4eva

Both of those are running VTP version 1, as shown by:

VTP V2 Mode : Disabled

Common mistake, don't get sucked in to what the VTP Version number says - that is just what it is capable of.