Cisco UC520W Incoming Call Issues

gregorio323gregorio323 Posts: 200Member ■■■□□□□□□□
Guys,

I'm having some issue setting up my home UC520W. I factory reset the device. Now I set up my SIP Trunk Provider. I can make outgoing calls just fine. but the Incoming calls is what is not working. I'm not sure why! I need some help. Here's a snippet of the debug message I get.

000458: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0

Record-Route: <sip:216.115.69.144;lr>

Max-Forwards: 66

Record-Route: <sip:216.115.69.132;lr>

To: <sip:[email protected]>

From: <sip:[email protected]>;tag=3584453800-165988

Session-Expires: 3600;refresher=uac

Call-ID: [email protected]

CSeq: 1 INVITE

Via: SIP/2.0/UDP 216.115.69.144;branch=z9hG4bKc293.9c30de92496ba7f9090fad541d4163e8.0

Via: SIP/2.0/UDP 216.115.69.131;branch=z9hG4bKc293.166d721907887af46425e5066d14ad1e.1

Via: SIP/2.0/UDP 216.115.69.132;branch=z9hG4bKc293.a4cda86405d1023079062fc351401fae.0

Via: SIP/2.0/UDP 66.42.120.184:5060;branch=z9hG4bK2cfafd3de71391ea18609e66475868ff

Contact: <sip:[email protected]:5060>

Expires: 330

Content-Type: application/sdp

Content-Length: 224

P-Asserted-Identity: <sip:[email protected]>



v=0

o=- 316792833 1375465651 IN IP4 66.42.121.5

s=-

c=IN IP4 66.42.121.5

t=0 0

m=audio 37484 RTP/AVP 0 18 101

a=rtpmap:18 G729/8000

a=fmtp:18 annexb=no

a=rtpmap:101 telephone-event/8000

a=fmtp:101 0-15

a=ptime:20


000459: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 400 Bad Request - 'Invalid Host'

Via: SIP/2.0/UDP 216.115.69.144;branch=z9hG4bKc293.9c30de92496ba7f9090fad541d4163e8.0,SIP/2.0/UDP 216.115.69.131;branch=z9hG4bKc293.166d721907887af46425e5066d14ad1e.1,SIP/2.0/UDP 216.115.69.132;branch=z9hG4bKc293.a4cda86405d1023079062fc351401fae.0,SIP/2.0/UDP 66.42.120.184:5060;branch=z9hG4bK2cfafd3de71391ea18609e66475868ff

From: <sip:[email protected]>;tag=3584453800-165988

To: <sip:[email protected]>;tag=1C43600-35C

Date: Fri, 02 Aug 2013 17:55:01 GMT

Call-ID: [email protected]

CSeq: 1 INVITE

Allow-Events: telephone-event

Reason: Q.850;cause=100

Server: Cisco-SIPGateway/IOS-12.x

Content-Length: 0

Comments

  • azaghulazaghul Posts: 569Member ■■■■□□□□□□
    Heres some code I use for my inbound SIP calls.

    Matches your called SIP number, translates it to x101, and sends it to my phone.

    Hope it helps.
    [FONT=courier new]voice translation-rule 90
     rule 1 /^12345xxxxx$/ /101/
     rule 2 /^67890xxxxx$/ /101/
    !
    voice translation-profile INBOUND-SIP-101
     translate called 90
    !         
    dial-peer voice 1001 voip
     translation-profile incoming INBOUND-SIP-101
     incoming called-number 12345xxxxx
    !
    dial-peer voice 1002 voip
     translation-profile incoming INBOUND-SIP-101
     incoming called-number 67890xxxxx
    !
    ephone-dn 1 dual
     number 101
    !
    ephone 1
     button 1:1[/FONT]
    
  • gregorio323gregorio323 Posts: 200Member ■■■□□□□□□□
    Hey Thanks for your response but I figured it out.

    Since my UC system was using a Private address I passed through the DHCP straight so it can get a public address. Then there was an ACL and the allow incoming calls from the provider. God It was such a big headache.
    azaghul wrote: »
    Heres some code I use for my inbound SIP calls.

    Matches your called SIP number, translates it to x101, and sends it to my phone.

    Hope it helps.
    [FONT=courier new]voice translation-rule 90
     rule 1 /^12345xxxxx$/ /101/
     rule 2 /^67890xxxxx$/ /101/
    !
    voice translation-profile INBOUND-SIP-101
     translate called 90
    !         
    dial-peer voice 1001 voip
     translation-profile incoming INBOUND-SIP-101
     incoming called-number 12345xxxxx
    !
    dial-peer voice 1002 voip
     translation-profile incoming INBOUND-SIP-101
     incoming called-number 67890xxxxx
    !
    ephone-dn 1 dual
     number 101
    !
    ephone 1
     button 1:1[/FONT]
    
Sign In or Register to comment.