ATM-T1-4T1-IMA module and the 2611XM

I have an ATM-T1-4T1-IMA module. I've tried to get this to work in a 2611XM but I keep getting messages to the effect that the module is not recognized.

Everything I have seen so far online indicates that this module should work. Any idea what I am missing?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Ivanjam

According to this: Cisco 2600 Series Modular Access Routers [Cisco 2600 Series Multiservice Platforms] - Cisco Systems , the following is required:

(1). The voice and fax and ATM network modules require a Cisco IOS Plus Software feature set
(2). Requires Cisco IOS Software Release 12.05XK, 12.07T, 12.1, 12.1T, 12.2, 12.2T, or later

theodoxa

It worked on (it actually came with it) my 2650 (IOS 12.2(2)XB5 ik8o3s). But, it won't support Frame-Relay switching. I tried and the "frame-relay route" command simply doesn't exist unless you add a couple of Serial or T1 WICs (which do support FR Switching).

politenessman

So I popped into the lab this morning and took a close look at what I have:
Just to confirm, this is a 2610XM.
Running show version gives me:

r2610xm>sh ver
Cisco IOS Software, C2600 Software (C2600-IPBASEK9-M), [B]Version 12.4(15)T11[/B], RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 28-Oct-09 18:16 by prod_rel_team


ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)


r2610xm uptime is 1 day, 1 hour, 39 minutes
System returned to ROM by power-on
System image file is "[B]flash:c2600-ipbasek9-mz.124-15.T11.bin[/B]"




This product contains .......


Cisco 2610XM (MPC860P) processor (revision 1.0) with 92485K/5819K bytes of memory.
Processor board ID JAE073302HN
M860 processor: part number 5, mask 2
1 FastEthernet interface
2 Serial interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)


Configuration register is 0x2102

The two serial interfaces listed are a WIC-1T and a T1 module.
The quad ATM T1 module does not appear in the list.

When I execute a reload I get this:

Smart Init is enabled
smart init is sizing iomem
  ID               MEMORY_REQ                 TYPE
00036A          0X000B3B80                   C2610XM Single Fast Ethernet
[B]0000BC          0X0025178C                   Four port T1 Inverse Mux for ATM[/B]
                    0X00098670                   public buffer pools
                    0X00211000                   public particle pools
TOTAL:          0X005AE97C

So it is somehow getting recognized by the OS ... sort of because once reload is complete, I see this:

Cisco 2610XM (MPC860P) processor (revision 1.0) with 92485K/5819K bytes of memory.
Processor board ID JAE073302HN
M860 processor: part number 5, mask 2
1 FastEthernet interface
2 Serial interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)


 Slot is empty or does not support clock participate 
 WIC slot is empty or does not support clock participate 
SETUP: new interface Serial0/1 placed in "shutdown" state




Press RETURN to get started!




[B]*Mar  1 00:00:11.703: SERVICE_MODULE(Serial0/0): self test finished: Passed[/B]
[B]*Mar  1 00:00:13.233: %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 18[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG]) is not supported on this image.[/B]
           Please issue "show diag" in fully loaded IOS image
           to get the PA's information and verify if it is supported
           by this image, a newer version may be needed.

... and the show diag gives me this: (Sorry for the length!)

r2610xm#sh diag
Slot 0:
    C2610XM 1FE Mainboard Port adapter, 3 ports
    Port adapter is analyzed 
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision        : 1.0
    PCB Serial Number        : FFFF
    Part Number              : 73-7677-02
    RMA History              : 00
    RMA Number               : 0-0-0-0
    Board Revision           : B0
    Deviation Number         : 0-0
    Product (FRU) Number     : C2610XM-1FE
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF 40 03 6A 41 01 00 C1 0B FF FF FF 46 46 46
      0x10: 46 FF FF FF FF 82 49 1D FD 02 04 00 81 00 00 00
      0x20: 00 42 42 30 80 00 00 00 00 FF FF FF FF FF FF FF
      0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          
    WIC Slot 0:
    FT1 PMC4351
    Hardware Revision        : 1.2
    PCB Serial Number        : FOC134518EC
    Part Number              : 73-8346-05
    Board Revision           : A0
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Deviation Number         : 0-0
    Product (FRU) Number     : WIC-1DSU-T1-V2      
    Top Assy. Part Number    : 800-22193-03
    CLEI Code                : IPUIAPRRAA
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF 40 00 52 41 01 02 C1 8B 46 4F 43 31 33 34
      0x10: 35 31 38 45 43 82 49 20 9A 05 42 41 30 03 00 81
      0x20: 00 00 00 00 04 00 80 00 00 00 00 CB 94 57 49 43
      0x30: 2D 31 44 53 55 2D 54 31 2D 56 32 20 20 20 20 20
      0x40: 20 C0 46 03 20 00 56 B1 03 C6 8A 49 50 55 49 41
      0x50: 50 52 52 41 41 FF FF FF FF FF FF FF FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


    WIC Slot 1:
    Serial 1T WAN daughter card
    Hardware revision 1.0             Board revision J0
    Serial number     25283823      Part number    800-01514-01
    FRU Part Number     WIC-1T=           
    Test history      0x0             RMA number     00-00-00
    Connector type    Wan Module
    EEPROM format version 1
    EEPROM contents (hex):
      0x20: 01 02 01 00 01 81 CC EF 50 05 EA 01 00 00 00 00
      0x30: 98 00 00 00 01 07 18 01 FF FF FF FF FF FF FF FF


Slot 1:
    Unknown (type 18[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG] Port adapter
    Port adapter is disabled 
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision        : 1.0
    Top Assy. Part Number    : 800-03974-03
    Board Revision           : D0
    Deviation Number         : 0-0
        Fab Version              : 05
    PCB Serial Number        : JAB0626080Y
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Product (FRU) Number     : NM-ATM-4T1=
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF 40 00 BC 41 01 00 C0 46 03 20 00 0F 86 03
      0x10: 42 44 30 80 00 00 00 00 02 05 C1 8B 4A 41 42 30
      0x20: 36 32 36 30 38 30 59 03 00 81 00 00 00 00 04 00
      0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

So yes it looks like I need something added to IOS to support this module. I guess the next question is; what do I need?

politenessman

So I fixed it - here is how.
I did some more digging about and yes, my router's IOS doesn't support the module, but ...

I have three routers; a 2610, 2610xm and a 2620.
I was using the 2620 as a frame relay switch, but it has the most recent IOS of any of my routers so I swapped it out for the 2610, transferred the modules about and hey presto, everything works.
It even gave me the chance to debug my frame relay set up again, which was fun and challenging!

Thanks for pointing me in the right direction!