I'm back! Re-try on boerlowie's VMware guide.
sendalot
Member Posts: 328
Hello, I'm back starting from scratch on boerlowie's guide.
Building the Ultimate vSphere Lab – Part 6: Domain Controller | Boerlowie's Blog says I need to "On the DNS Delegation, selection the option to no create the DNS delegation."
Does he mean, create the DNS delegation, or not? Must be a type-o.
http://boerlowie.wordpress.com/2011/12/15/building-the-ultimate-vsphere-lab-part-10-storage/
"Power On the ESXi hosts. Select a host and go into Configuration – Networking. Your current config will look like this:"
How do I get to that page to add switches and such?
Thanks.
Building the Ultimate vSphere Lab – Part 6: Domain Controller | Boerlowie's Blog says I need to "On the DNS Delegation, selection the option to no create the DNS delegation."
Does he mean, create the DNS delegation, or not? Must be a type-o.
http://boerlowie.wordpress.com/2011/12/15/building-the-ultimate-vsphere-lab-part-10-storage/
"Power On the ESXi hosts. Select a host and go into Configuration – Networking. Your current config will look like this:"
How do I get to that page to add switches and such?
Thanks.
Comments
-
JBrown
Member Posts: 308
Log into the nested esxi host you want to manage, then go to Configuration tab, networking tab
add networking.
Take a look at the complete view: http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.0.2/html/Installation_Guide/images/vmware-physical-network.png -
sendalot
Member Posts: 328
Step 11 on ,Building the Ultimate vSphere Lab – Part 11: vMotion & Fault Tolerance | Boerlowie's Blog
Where do I go for "Now, before you enable FT on a VM, you need to set the following Advanced Configuration Parameters on EACH VM you want to protect with FT."
and since all my host and VMs are 64-bit, the step doesn't apply to me?
Thanks.
