3 routers, no switches, and I want to telnet to any/all of them from any router

Rodzilla G

Ok I am doing some labs and the tasks calls for connecting 3 routers together (no switches) with both Serial connections and Fastethernet crossover connections. The fastether connections have Rip ver 2 and no auto-summary setup.

Here is my setup is as follows:

Router1:

Int s 2/0= 172.16.1.1/30 (Serial from Router 1 to router 2)
Int s 3/0= 172.16.1.9/30 (Serial from Router 1 to router 3)
Int F 0/0 = 192.168.1.1/24 (From Router 1 to router 2)
Int F 1/0 = 192.168.3.1/24 (From Router 1 to router 3)

Router2:

Int s 2/0=172.16.1.2/30 (Serial from Router 2 to router 1)
Int s 3/0=172.16.1.5/30 (Serial from Router 2 to router 3)
Int F 0/0=192.168.1.2/24 (From Router 2 to router 1)
Int F 1/0=192.168.2.1/24 (From Router 2 to router 3)

Router3:

Int s 2/0=172.16.1.6/30 (Serial from Router 3 to router 2)
Int s 3/0=172.16.1.10/30 (Serial from Router 3 to router1)
Int F 0/0=192.168.3.2 (From Router 3 to router 1)
Int F 1/0=192.168.2.2 (From Router 3 to router 2)

I have checked all statuses. All are up and up. My question is....How can I ping and then ultimately telnet to each of the routers in this configuration? There are no switches given in this lab scenario. Again I do have Rip v2 setup, but that is on the fastethernet connections. I thought about changing the encapsulation to ppp and then giving a username and password under that scheme, but I am not sure. Any help is appreciated.

tjh87

Ok, you SAY you have RIP setup. The real question is: is it setup correctly? A copy and paste of your routing tables would go a long way in us helping you. Or at least your RIP configurations.