Console pinouts for Cisco 771M Anyone?

EdTheLad

This router has a DB9 female connector on the chassis!

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

he-man

I had a cisco access point with just a DB9 female as well

:

It was the only port other than the RJ45 connection on it which made me think it was a console port of some kind as well so a pinout would be good if any one knows.

darkuser

this says the console is a db9 ....

http://www.cisco.com/en/US/products/hw/routers/ps331/products_data_sheet09186a008009202c.html

wildfire

I have a very old cisco access server with a DB9 Fem connecter and it came with the cable, I buzzed it out with a fluke and its straight through on 2, 3 ,4,5 and 7 nothing on 1,6,8 and 9

forbesl

ed_the_lad wrote:

This router has a DB9 female connector on the chassis!

Then you're gonna need one of these!

http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID862368&partno=01911&search=ADAPTER&rsite=pccables.com&rcode=

For the pinouts, refer to this:

http://www.cisco.com/en/US/products/hw/routers/ps331/products_user_guide09186a00800ed8fc.html#29672

wildfire

wow those are pretty cool, are they solder free also? to think all these years I have been doing it all manually!

forbesl

wildfire wrote:

..are they solder free also?

Yup, solder-free. Just push the pin into the appropriate hole.

zom

does normal cat5 network cables work for the console? or need a special type of cable? which is flat? dunno wat it calls lol thx ^^

forbesl

zom wrote:

does normal cat5 network cables work for the console? or need a special type of cable? which is flat? dunno wat it calls lol thx ^^

It's called a "rolled" or "rollover" cable and you can use CAT5 cable to make one. Here are the pinouts:

http://www.cisco.com/en/US/products/hw/routers/ps332/products_tech_note09186a0080094ce6.shtml#topic8