cabling
dolphin_m70
Member Posts: 47 ■■□□□□□□□□
in CCNA & CCENT
thx for ur help
one more question regarding the h/w
im configuring one router (2501 as frame relay switch)
second and third as normal routers making the frame relay cloud
cud u pls tell me the necc cabling required for this
like what type of cable shud i use to connect the routers so as to configure as
above
thx
one more question regarding the h/w
im configuring one router (2501 as frame relay switch)
second and third as normal routers making the frame relay cloud
cud u pls tell me the necc cabling required for this
like what type of cable shud i use to connect the routers so as to configure as
above
thx
Comments
-
Webmaster
Admin Posts: 10,292 Admin
The second and the third router should both have a serial back-to-back connection to the FR switch. I.e. If router1 is the FR switch, there would be a connection from router1's serial0 port to router2's serial0, and a connection from router3's serial0 to router2's serial1. -
dolphin_m70
Member Posts: 47 ■■□□□□□□□□
thx webmaster , i guess u missd to specify the cables which i shud buy,is it dce/dte cable (db60) cud u pls clarify
-
Webmaster
Admin Posts: 10,292 Admin
Actually I did include the cable type, "back-to-back", meaning one end is DCE and the other is DTE. That's physically a single cable. Or, you can use a DCE and a DTE and connect them together as outlined in our The Hardware TechLab I mentioned in your other topic.