Home lab server -- which would you choose?

SvobodaSvoboda Member Posts: 95 ■■□□□□□□□□
I think I'm down to the following two servers for my home VMware lab. There are just a few difference between them. Which of the two would you pick if it were up to you? I think I'm leaning towards the first link.

Dell PowerEdge 2950 II Server Quad Core X5355 2x2 66GHz 32GB 6X300GB PERC5i 2U | eBay

or

Dell PowerEdge 2950 8 Core Virtualization Server 32GB RAM 6X300GB 15K 1 8TB 2ps | eBay

I've got a copy of VMware vSphere Essentials.

Comments

  • stryder144stryder144 Member Posts: 1,684 ■■■■■■■■□□
    I would go to the VMware Hardware Compatibility Guide website and see if it is supported by the version of vSphere you are looking to use.

    If the servers are on the HCG, I would say buy the cheaper of the two. Other than the price and the CPU speeds, they appear to be just about even in the specification department. Heck, the cheaper of the two seems to be the faster, as well.
    The easiest thing to be in the world is you. The most difficult thing to be is what other people want you to be. Don't let them put you in that position. ~ Leo Buscaglia

    Connect With Me || My Blog Site || Follow Me
  • MagmadragoonMagmadragoon Member Posts: 172 ■■■□□□□□□□
    Have you checked the ESXI compatibility guide for those two servers? I think those servers are limited to Esxi 5.5 at best. You could use an Intel Nuc and put Esxi 6 for a home lab server. The Intel Nuc will save on electricity cost.
  • SvobodaSvoboda Member Posts: 95 ■■□□□□□□□□
    Have you checked the ESXI compatibility guide for those two servers? I think those servers are limited to Esxi 5.5 at best. You could use an Intel Nuc and put Esxi 6 for a home lab server. The Intel Nuc will save on electricity cost.

    Yep, just saw that thanks to styder. Back to the drawing board as I definitely want something 6.x compatible.
  • EssendonEssendon Member Posts: 4,546 ■■■■■■■■■■
    Get a HP DL380 G7, throw some decent RAM on it and as much disk as you can get. Nested lab's the way to go. You may think - oh this server's going to be loud. Well yeah it is loud, but only when it boots up and does its POST things, after that it's just about as quiet as it gets. I have had a G5, then a G6 for all me labbing so far. No issues.
    NSX, NSX, more NSX..

    Blog >> http://virtual10.com
  • kj0kj0 Member Posts: 767
    Don't have time now, but I will dig out the post I was reading last week where someone did a HomeLab upgrade with supermicro boxes. They only have 1 Fan in them and quite efficient.
    2017 Goals: VCP6-DCV | VCIX
    Blog: https://readysetvirtual.wordpress.com
  • netsysllcnetsysllc Member Posts: 479 ■■■■□□□□□□
    you can get the Dell PE R610 for about the same price with dual processors, throw in an SSD drive and you are golden.
  • kj0kj0 Member Posts: 767
    The issue with the R610's is that they are single RU and are as loud as a jet.
    2017 Goals: VCP6-DCV | VCIX
    Blog: https://readysetvirtual.wordpress.com
  • SvobodaSvoboda Member Posts: 95 ■■□□□□□□□□
    I have a rack in my home office with about 3-4U of space left open.

    I'm also not one that really gets annoyed by PC noise. I've got two machines on my desktop with a ton of fans in them -- at least 6-8 fans in each.
  • dhay13dhay13 Member Posts: 580 ■■■■□□□□□□
    i'm running a 2950 III with esxi 5.5. 32GB ram and a 1TB HD. i have another 1TB HD to add but haven't done it yet. it is quite loud though. the install went smooth and i had no issues. very easy setup
  • iBrokeITiBrokeIT Member Posts: 1,318 ■■■■■■■■■□
    I went quiet, small(ish) and $$$$ route by using x3 1U servers are replaced each 1U fan with with two Noctua NF-A4x10 fans. I even tore into my 52 port switch and stuck two in there. The 7200 RPM HDs in my NAS are the the loudest thing in my lab. Year and half later still going strong.
    2019: GPEN | GCFE | GXPN | GICSP | CySA+ 
    2020: GCIP | GCIA 
    2021: GRID | GDSA | Pentest+ 
    2022: GMON | GDAT
    2023: GREM  | GSE | GCFA

    WGU BS IT-NA | SANS Grad Cert: PT&EH | SANS Grad Cert: ICS Security | SANS Grad Cert: Cyber Defense Ops SANS Grad Cert: Incident Response
  • jibbajabbajibbajabba Member Posts: 4,317 ■■■■■■■■□□
    T5500 or R710 for me icon_wink.gif
    My own knowledge base made public: http://open902.com :p
  • DeathmageDeathmage Banned Posts: 2,496
    kj0 wrote: »
    The issue with the R610's is that they are single RU and are as loud as a jet.


    If you replace the fan with ultra-quiet fans it's purrs like a kitten. All 4 of the R610's I have don't overheat at all, but the fans are super quiet. The Dell supplied fans don't have double-ball bearing fans that are balanced correctly so they make a **** ton of noise. icon_biggrin.gif

    But yes a HP DL or a Dell R610/510/710 are popular home-lab servers....

    I'm not the norm, but I got 4 of them right now. icon_wink.gif ...I'm using vSAN with a 24 port 10G FCoE Brocade switch with dual 10G fiber per host, 4 ports per host. icon_smile.gif ...I'm also using two QNAP NAS's, one of the QNAP NAS's have Dual 10G FCoE adapter's for the Primary LUN's for the cluster; using vSAN for when I use SQL in the home-lab.

    The 1st NAS I got last year is for the Veeam Backups of the cluster. Whenever I blow away th cluster I just use Veeam to restore the VM's so I don't need to re-do all of the VM's from scratch.
  • dave330idave330i Member Posts: 2,091 ■■■■■■■■■■
    Hands on Lab. I can do most things I need and it's free.
    2018 Certification Goals: Maybe VMware Sales Cert
    "Simplify, then add lightness" -Colin Chapman
  • DeathmageDeathmage Banned Posts: 2,496
    dave330i wrote: »
    Hands on Lab. I can do most things I need and it's free.


    I was thinking of moving to NoVA to work in DC, then I figured Dave330i would always be over playing in the lab and then I'd form this friendship that would block out the sun and force me to living in my cave 24/7... so I decided not to move. icon_wink.gif
  • gncsmithgncsmith Member Posts: 459 ■■■□□□□□□□
    jibbajabba wrote: »
    T5500 or R710 for me icon_wink.gif

    Upvote on this, can't go wrong here and you'll be glad you went with a server that's not as loud. Plus, you have a LOT more upgrade options for future projects.
  • dhay13dhay13 Member Posts: 580 ■■■■□□□□□□
    i have a T7500 also to go along with my 2950 but my T7500 only has 4 GB ram and a single xeon dual core CPU. i had planned on just upgrading it but it was cheaper to buy the 2950. i still plan to upgrade the T7500 down the road so then i will have 2 beefy servers to play with
  • mokazmokaz Member Posts: 172
    well, to me dudes likes these has always been quiet and powerful enough...
    Shuttle Europe: Overview

    now of course i'm rather playing around with infosec appliances / Linux and and small Windows boxes but well got one and its really doing the job more then well...
  • jibbajabbajibbajabba Member Posts: 4,317 ■■■■■■■■□□
    mokaz wrote: »
    well, to me dudes likes these has always been quiet and powerful enough...
    Shuttle Europe: Overview

    now of course i'm rather playing around with infosec appliances / Linux and and small Windows boxes but well got one and its really doing the job more then well...

    Not bad - at least it is supporting 16GB of RAM .. but I think with vSphere 6.x onwards you really need 32 per host ....
    My own knowledge base made public: http://open902.com :p
  • kj0kj0 Member Posts: 767
    jibbajabba wrote: »
    Not bad - at least it is supporting 16GB of RAM .. but I think with vSphere 6.x onwards you really need 32 per host ....
    IN my nested I am running 15Gb per host. The physical host itself only has 32Gb, but it works well until I want to try and spin up vROPs and any other kind of VMware Appliance.
    2017 Goals: VCP6-DCV | VCIX
    Blog: https://readysetvirtual.wordpress.com
  • jibbajabbajibbajabba Member Posts: 4,317 ■■■■■■■■□□
    I guess I keep forget that not everyone runs vCD, vRA, vIN, vRO and vROPS in their lab :D
    My own knowledge base made public: http://open902.com :p
  • kj0kj0 Member Posts: 767
    Not all at once and not at the moment. One day....
    2017 Goals: VCP6-DCV | VCIX
    Blog: https://readysetvirtual.wordpress.com
  • SvobodaSvoboda Member Posts: 95 ■■□□□□□□□□
    Ended up picking up a R710 2x2.93GHz x5570 with 64GB RAM for 3 and change.

    Dell PowerEdge R710 2 5" Server 2x2 93GHz Quad Core X5570 64GB PERC6I 1PS iDRAC6 | eBay

    Gonna need to pick up some HDs now. Any suggestions there?
  • KonfliktKonflikt Member Posts: 43 ■■■□□□□□□□
    what about the nested solutions? (WKS + nested vSphere, free iSCSI NAS). only SSD and RAM are needed. That was enough for me during the whole DCA preparation.
    for 2013: [x] 3x VCA, [x] VCAP5-DCA, [-] VCAP-DCD - failed. PASSED in 2014
    for 2014: [x] BACP, [x] SCP, [x] 70-409, [x] VCAP-DCD
    for 2015: [x] VCP6-DCV,
    for 2016: [x] upgrade VCAPs to VCIX6-DCV, [x] CCNA [-]
    2019: NEW job, back to again to the datacenter area:)
    My Virtual blog: vthing.wordpress.com
  • TheitmartTheitmart Registered Users Posts: 1 ■□□□□□□□□□
    Hi,

    I read your thread; This is very interesting and informative. You have shared great information, but I want to give my suggestion Please click on the below link. You will get more information about the dell servers.

    https://www.theitmart.com/used-dell-servers

    Thanks.
  • scott28ttscott28tt Member Posts: 686 ■■■■■□□□□□
    Theitmart wrote: »
    Hi,

    I read your thread; This is very interesting and informative. You have shared great information, but I want to give my suggestion Please click on the below link. You will get more information about the dell servers.

    https://www.theitmart.com/used-dell-servers

    Thanks.
    I'm glad we don't get much spam on here...
    VCP2 / VCP3 / VCP4 / VCP5 / VCAP4-DCA / VCI / vExpert 2010-2012
    Blog - http://vmwaretraining.blogspot.com
    Twitter - http://twitter.com/vmtraining
    Email - vmtraining.blog@gmail.com
  • kj0kj0 Member Posts: 767
  • stryder144stryder144 Member Posts: 1,684 ■■■■■■■■□□
    Hahahaha...Glorious Spam!
    The easiest thing to be in the world is you. The most difficult thing to be is what other people want you to be. Don't let them put you in that position. ~ Leo Buscaglia

    Connect With Me || My Blog Site || Follow Me
  • jamshid666jamshid666 Member Posts: 48 ■■■□□□□□□□
    Baked beans are off!
    WGU BS - Network Operations and Security Estimated completion: May 2019
    Remaining courses: C846 (ITIL), C768 (OA), C850 (OA), C769 (Capstone)
    Active Certifications: A+, CCDA, CCNA-R&S, CCNA-Security, CIW-SDA, i-Net+, Network+, Project+, Security+, Server+, Splunk Certified User, VCP-DCV
    Expired Certifications: CCNP, LPIC-1, MCSE, RHCSE,
  • Jon_CiscoJon_Cisco Member Posts: 1,772 ■■■■■■■■□□
    I don't see many posts about Hyper v. I am starting to study for MCSA so I am looking to set up a hyper v server that I can spin up dozens of machines inside. Has anyone run hyper v on the dell r710? I am thinking I will pick up one with 144GB of ram but I don't want to jump into it and find out it's not compatible with something I didn't consider.

    Any feedback would be appreciated!

    Jon
Sign In or Register to comment.